M10 × 1, without armor
Item NO.:
330905-00-10-10-02-00Order(MOQ):
1Goods Stock:
14Payment:
T/TLead Time：
In stockWeight:
0.32KGDimension:
113x1.8x1.5cmDescription:
3300 NSV PROXIMITY PROBEPrice:
Ask
Compact NSv probe for matched proximity systems where installation clearance is limited.
Bently Nevada 330905-00-10-10-02-00 belongs to the 3300 XL NSv Proximity Transducer System. Compact NSv probe for matched proximity systems where installation clearance is limited.
M10 × 1, without armor
0 mm unthreaded
100 mm case
1.0 m total lead
Standard cable
Approval not required
| Case thread | M10 × 1 |
|---|---|
| Cable armor | Without armor |
| Unthreaded length | 0 mm |
| Overall case length | 100 mm |
| Total lead length | 1.0 m |
| Connector / cable | Miniature coaxial ClickLoc; standard cable |
| Linear range | 1.5 mm (60 mil) family range |
| Sensitivity | 7.87 V/mm (200 mV/mil) nominal |
| Probe operating temperature | -52 to +177 °C |
| Minimum bend radius | 25.4 mm |
| Maximum thread engagement | 15 mm |
| Approval option | 00 — not required |
| Current backend stock | 14 |
| Current backend weight | 0.32KG |
| Current backend dimensions | 113x1.8x1.5cm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Capture the installed identity and mechanical context before disconnection.
Compare the exact family, length, mounting and connector details.
Review the receiving system, scale and commissioning response.
Include every order-code segment, manufacturer nameplate and approval marking.
Show the connected probe, cable, sensor, transmitter, rack module and receiving input as applicable.
Current backend stock, packed weight and dimensions remain unchanged until new warehouse evidence is supplied.
It belongs to the compact 3300 XL NSv family, but the installed M10 × 1 thread, 100 mm case and actual cable exit clearance still need to be measured.
Keep M10 × 1 thread engagement to 15 mm maximum and verify the target reach before setting probe gap.
Make it finger-tight only and do not exceed 0.56 N·m. Keep the connection clean and free of cable side load.
Confirm the receiving system matches the NSv family’s 1.5 mm linear range and nominal 200 mV/mil sensitivity before recording the baseline.
Verify the matched NSv chain and total length, probe gap, connector seating, 25.4 mm cable bend radius and receiving-channel setup.
Complete-label comparison before quotation.
Support for maintenance and project spares.
Quotation, delivery and after-sales communication.
Coverage begins on the shipment date unless the confirmed quotation states otherwise. Scope and available remedy follow the confirmed quotation and sales agreement.
Keep the product label and complete order reference.
Add connector or terminal photos and associated signal-chain labels.
Describe the observed symptom and operating context clearly.
Baker Hughes 3300 XL NSv Datasheet 147385 provides the family specifications, ordering table and installation context used for this review.
Exact-version note: 0 mm unthreaded · 100 mm case · 1.0 m lead · standard ClickLoc cable · approval not required
Open Official DatasheetAsk a Product QuestionRelated Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
