M10 × 1, without armor
Item NO.:
330103-00-10-10-01-00Order(MOQ):
1Goods Stock:
20Payment:
T/TLead Time：
In stockWeight:
0.1KGDimension:
20.5x22.4x3.3cmDescription:
3300 XL 8 MM PROXIMITY PROBEPrice:
Ask
Metric 8 mm proximity probe for matched vibration and shaft-position measurement systems.
Bently Nevada 330103-00-10-10-01-00 belongs to the 3300 XL 8 mm Proximity Transducer System. Metric 8 mm proximity probe for matched vibration and shaft-position measurement systems.
M10 × 1, without armor
0 mm unthreaded
100 mm case
1.0 m total lead
Standard + protector
Approval not required
| Case thread | M10 × 1 |
|---|---|
| Cable armor | Without armor |
| Unthreaded length | 0 mm |
| Overall case length | 100 mm |
| Total lead length | 1.0 m |
| Connector / cable | ClickLoc; standard cable with protector |
| Linear range | 2.0 mm (80 mil) family range |
| Sensitivity | 7.87 V/mm (200 mV/mil) nominal |
| Probe operating temperature | -51 to +177 °C |
| Minimum bend radius | 25.4 mm |
| Approval option | 00 — not required |
| Current backend stock | 20 |
| Current backend weight | 0.1KG |
| Current backend dimensions | 20.5x22.4x3.3cm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Capture the installed identity and mechanical context before disconnection.
Compare the exact family, length, mounting and connector details.
Review the receiving system, scale and commissioning response.
Include every order-code segment, manufacturer nameplate and approval marking.
Show the connected probe, cable, sensor, transmitter, rack module and receiving input as applicable.
Current backend stock, packed weight and dimensions remain unchanged until new warehouse evidence is supplied.
Confirm the M10 × 1 thread, 0 mm unthreaded section and 100 mm case length. Keep thread engagement within the stated 15 mm maximum.
Route the standard cable without side load, clean and seat the ClickLoc connection, then fit the protector where it can be inspected during maintenance.
Only if its family and length form the required 3300 XL 8 mm total system length with the probe’s 1.0 m lead and the installed Proximitor Sensor.
Check mounting reach, probe gap, matched 8 mm components, connector condition and channel baseline before treating the change as a machine condition.
Protect the unarmored lead from abrasion and hot or moving parts, maintain the 25.4 mm minimum bend radius and avoid pulling on the connector.
Complete-label comparison before quotation.
Support for maintenance and project spares.
Quotation, delivery and after-sales communication.
Coverage begins on the shipment date unless the confirmed quotation states otherwise. Scope and available remedy follow the confirmed quotation and sales agreement.
Keep the product label and complete order reference.
Add connector or terminal photos and associated signal-chain labels.
Describe the observed symptom and operating context clearly.
Baker Hughes 3300 XL 8 mm Datasheet 141194 provides the family specifications, ordering table and installation context used for this review.
Exact-version note: 0 mm unthreaded · 100 mm case · 1.0 m lead · standard cable with connector protector · approval not required
Open Official DatasheetAsk a Product QuestionRelated Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
