Item NO.:
10030-05-30-05-02Order(MOQ):
1Goods Stock:
15Payment:
T/TLead Time：
In stockWeight:
0.7KGDimension:
7.0x13.3x13.3cmDescription:
REVERSE-MOUNT PROXIMITY PROBEPrice:
Ask10030-05-30-05-02 is cataloged here as a Bently Nevada 7200-series 8 mm reverse-mount proximity probe. The current Metrix 10000-series document cross-references the same legacy 7200 order-code geometry for installed-base support.
10030-05-30-05-02 specifies M10 × 1 thread, 5 mm unthreaded length, 30 mm case length and a 0.5 m probe lead. Confirm all four dimensions against the installed sleeve and machinery drawing before replacement.
The probe must remain in a matched 7200-series chain. A 0.5 m probe lead combines with a 4.5 m extension cable for a 5 m system or an 8.5 m cable for a 9 m system; do not mix it with 3300, 3300 XL or 3000-series components.
Thread compatibility is necessary but not sufficient. Confirm the installed sleeve, 5 mm unthreaded section, 30 mm case, insertion depth and target access before releasing the replacement.
Install it in the compatible reverse-mount sleeve, preserve the cable bend radius, set the approved probe gap and secure the assembly without transferring torsion or side load into the probe lead.
No direct substitution should be assumed. 10030 uses M10 × 1 metric geometry, while 10026 uses 3/8-24 thread and inch-coded dimensions; the housing and insertion depth also differ.
Inspect the probe gap, connector contact, cable continuity, routing and shield condition, then verify that the probe, extension cable and electronics form the correct 5 m or 9 m 7200-series chain.
Trend the channel baseline and alarms, keep the cable and housing mechanically secure, and investigate any sudden gap-voltage or vibration change before adjusting monitor settings.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the product nameplate, original packaging and transaction record available if warranty support is required.
|
330130-080-03-05 |
1701/15 |
330103-12-25-10-01-00 |
|
330130-080-02-00 |
128031-01C |
330103-12-25-10-02-00 |
|
330130-040-10-CN |
VELOMITOR 330500 |
330103-13-23-05-02-00 |
|
330103-00-08-10-02-05 |
130944-01 128275-01F |
330104-00-02-10-02-00 |
|
330104-00-25-10-02-00 |
330103-11-19-10-02-00 |
330104-00-04-05-02-00 |
|
330104-00-20-05-02-00 |
330103-05-10-10-02-05 |
330104-00-04-10-02-00 |
|
330104-00-22-10-02-00 |
330103-05-12-10-01-00 |
330104-00-04-10-02-05 |
|
330104-00-12-05-02-00 |
330103-05-13-10-02-00 |
330104-00-04-50-11-00 |
|
330104-10-20-05-02-00 |
330103-05-15-05-02-00 |
330104-00-05-05-02-00 |
|
330905-00-07-10-02-00 |
330103-06-13-10-02-00 |
330104-00-05-10-02-00 |
|
330172-16-42-10-01-00 |
330103-07-12-10-02-00 |
330104-00-05-50-02-00 |
|
330101-02-78-05-02-00 |
330103-07-16-05-02-00 |
330104-00-06-05-02-00 |
|
330104-00-15-10-01-CN |
330104-00-08-10-02-CN |
330104-00-06-10-02-00 |
|
330103-00-21-10-11-CN |
330103-06-13-05-02-CN |
330104-00-04-10-02-CN |
|
330703-000-050-10-02-00 |
330710-000-060-10-02-00 |
330103-15-23-05-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
