Item NO.:
10026-02-12-05-02Order(MOQ):
1Goods Stock:
15Payment:
T/TLead Time：
In stockWeight:
0.7KGDimension:
7.0x13.3x13.3cmDescription:
REVERSE-MOUNT PROXIMITY PROBEPrice:
Ask10026-02-12-05-02 is cataloged here as a Bently Nevada 7200-series 8 mm reverse-mount proximity probe. The current Metrix 10000-series document cross-references the same legacy 7200 order-code geometry for installed-base support.
10026-02-12-05-02 specifies 3/8-24 thread, 0.2 in unthreaded length, 1.2 in case length and a 0.5 m probe lead. Confirm all four dimensions against the installed sleeve and machinery drawing before replacement.
The probe must remain in a matched 7200-series chain. A 0.5 m probe lead combines with a 4.5 m extension cable for a 5 m system or an 8.5 m cable for a 9 m system; do not mix it with 3300, 3300 XL or 3000-series components.
Confirm a compatible 3/8-24 sleeve, set the required insertion depth, lock the probe without twisting the lead and establish the approved probe gap before returning the channel to service.
No. The current 7200-series cross-reference states that its probes, extension cables and electronics form a matched family and must not be mixed with 3300, 3300 XL or 3000-series components.
Check the probe gap, connector seating, total system length, cable routing, shield condition and target surface. Compare the channel response with the approved baseline before changing monitor settings.
Its 0.5 m lead pairs with a 4.5 m 7200-series extension cable for a 5 m system or an 8.5 m cable for a 9 m system; cable armor is selected separately.
No. Pressure capability depends on the complete reverse-mount housing assembly, insertion depth and installation. Verify the housing order code and project requirement before release.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the product nameplate, original packaging and transaction record available if warranty support is required.
|
330130-080-03-05 |
1701/15 |
330103-12-25-10-01-00 |
|
330130-080-02-00 |
128031-01C |
330103-12-25-10-02-00 |
|
330130-040-10-CN |
VELOMITOR 330500 |
330103-13-23-05-02-00 |
|
330103-00-08-10-02-05 |
130944-01 128275-01F |
330104-00-02-10-02-00 |
|
330104-00-25-10-02-00 |
330103-11-19-10-02-00 |
330104-00-04-05-02-00 |
|
330104-00-20-05-02-00 |
330103-05-10-10-02-05 |
330104-00-04-10-02-00 |
|
330104-00-22-10-02-00 |
330103-05-12-10-01-00 |
330104-00-04-10-02-05 |
|
330104-00-12-05-02-00 |
330103-05-13-10-02-00 |
330104-00-04-50-11-00 |
|
330104-10-20-05-02-00 |
330103-05-15-05-02-00 |
330104-00-05-05-02-00 |
|
330905-00-07-10-02-00 |
330103-06-13-10-02-00 |
330104-00-05-10-02-00 |
|
330172-16-42-10-01-00 |
330103-07-12-10-02-00 |
330104-00-05-50-02-00 |
|
330101-02-78-05-02-00 |
330103-07-16-05-02-00 |
330104-00-06-05-02-00 |
|
330104-00-15-10-01-CN |
330104-00-08-10-02-CN |
330104-00-06-10-02-00 |
|
330103-00-21-10-11-CN |
330103-06-13-05-02-CN |
330104-00-04-10-02-CN |
|
330703-000-050-10-02-00 |
330710-000-060-10-02-00 |
330103-15-23-05-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
