Selection
- Confirm the installed 200350 or 200355 accelerometer connection and the required 10 ft route.
- Match the two-socket female connector and terminal-lug endpoint instead of selecting by length alone.
Item NO.:
84661-10Order(MOQ):
1Goods Stock:
10Payment:
T/TLead Time：
In stockWeight:
0.26KGDimension:
3.1x19x12.8cmDescription:
CABLEPrice:
Ask84661-10 is a 10 ft armored accelerometer cable with a moisture-resistant two-socket female connector and terminal lugs.
84661-10 is a Bently Nevada armored cable documented for the 200350 and 200355 accelerometer family. The 10 suffix on 84661-10 specifies a finished cable length of 10 ft, approximately 3.0 m.
84661-10 has a moisture-resistant two-socket female connector at the sensor end and terminal lugs at the field-wiring end. The armored construction provides mechanical protection for industrial routing.
84661-10 should be matched to the documented accelerometer connector, required route length and instrument termination. Similar length alone does not establish compatibility with another sensor or proximity-cable family.
It is designed for those accelerometer families and provides a moisture-resistant two-socket sensor connector plus armored mechanical protection. The terminal-lug end still needs a dry, strain-relieved cabinet termination for reliable service.
Inspect the moisture-resistant connector for incomplete seating or contamination, then test conductor continuity and terminal-lug tightness. If the signal responds to connector movement, the cable endpoint is a more useful diagnostic lead than replacing the sensor immediately.
Confirm the two-socket connector is fully engaged, document the terminal-lug assignment and compare the channel reading under the same machine condition used before the change. This exposes polarity, termination or routing differences early.
A visual resemblance is not enough. This cable is documented for the 200350 and 200355 families with a two-socket female endpoint, so the installed sensor interface should match before the cable is selected.
Use the armor for mechanical protection, but still separate the signal route from high-energy wiring, avoid tight bends and support both endpoints. Good routing reduces induced noise and connector strain at the same time.
Provide the 200350 or 200355 sensor context, 10 ft route, moisture-resistant two-socket connector, terminal-lug end and quantity. These application details are more reliable than a photo of the armor alone.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete product label, original packaging and transaction record so the exact unit can be identified quickly if support is required.
This reviewed 4-page PDF contains selected official manufacturer pages covering the exact product family, ordering codes and relevant configuration facts.
Open 84661-10 Datasheet|
84661-17 |
149992-01 |
125680-01 |
|
135489-04 |
330850-50-05 |
125704-01 |
|
330180-91-05 |
3500/33 149986-01 |
125720-01 |
|
330180-X1-CN |
3500/32M 149986-02 |
125720-02 |
|
330180-50-CN |
330103-00-06-10-02-00 |
125736-01 |
|
102045-040-00 |
330105-02-12-15-12-05 |
125760-01 |
|
9200-02-01-10-00 |
330103-00-03-10-02-00 |
125768-01 |
|
330103-00-04-10-02-00 |
330104-00-04-10-02-05 |
125800-01 |
|
330103-00-14-05-02-00 |
330104-00-14-10-02-05 |
125800-02 |
|
330103-00-02-10-02-05 |
330106-05-30-10-02-00 |
125840-01 |
|
330101-00-12-10-02-05 |
330103-00-03-05-02-00 |
125840-02 |
|
330105-02-12-05-02-00 |
330101-00-12-10-02-05 |
126615-01 |
|
330905-00-03-10-02-00 |
330103-00-05-05-02-00 |
126632-01 |
|
330104-00-05-05-02-CN |
330103-00-05-05-02-CN |
126648-01 |
|
330704-000-050-10-01-05 |
330103-00-05-10-02-CN |
126648-02 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
