It suits a standard-mount NSv location that accepts a 3/8-24 UNF body, needs a 6.0 in case and can accommodate the 1.0 m armored lead. The target reach and connector space should be confirmed before the outage begins.

Separate mechanical and electrical causes: confirm probe security and target gap, then inspect the ClickLoc connection, armored lead and matching NSv interface. This avoids treating a mounting or connector issue as a monitor-calibration problem.

We advise against mixing the families because this probe belongs to the 3300 XL NSv system. The extension cable and Proximitor Sensor should be the documented NSv components so the measurement chain retains the intended electrical behavior.

Place the joint in a clean, dry and strain-relieved location or suitable enclosure while respecting the cable bend path. Connector code 02 does not include a protector, so the installation environment becomes an important reliability decision.

Record the installed gap, channel baseline, probe mounting position, NSv interface part numbers and connector condition under a known machine state. That record gives future diagnostics a trustworthy comparison point.

Option 05 is the multiple-approvals selection, but the physical label and the complete installed system still need to match the site requirement. The ordering code supports the review; it does not replace project certification checks.