Prove the side-exit envelope
Check the 1.06-inch smooth case, 2.3-inch length, clamp position and cable departure against the drawing.
Item NO.:
330851-04-000-023-10-01-05Order(MOQ):
1Goods Stock:
29Payment:
T/TLead Time：
In stockWeight:
0.2KGDimension:
20.5x22.5x3.5cmDescription:
PROXIMITY PROBESPrice:
AskSend the complete nameplate, installed system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
Exact-model engineering context
Side-exit routing can solve clearance problems near a differential-expansion target, but the probe body and cable exit must be checked as one mechanical envelope. 330851-04-000-023-10-01-05 uses the smooth 1.06-inch side-exit case with a 2.3-inch overall case length.
The one-metre lead has stainless-steel armor and must be completed with the supported 25 mm extension cable and nine-metre Proximitor Sensor. Armor improves mechanical protection; it does not allow tight bends, connector loading or an incorrect total system length.
The 05 approval selection adds delivered-marking and certificate-condition checks. Confirm the bracket or clamp, target material, orientation, expected travel, cable exit path and complete identity before ordering or setting the operating position.
Selection and installation decisions
Check the 1.06-inch smooth case, 2.3-inch length, clamp position and cable departure against the drawing.
Pair the one-metre armored lead with the supported extension cable and nine-metre 25 mm Proximitor Sensor.
Review target geometry and movement together with the delivered 05 marking and certificate conditions.
Official configuration and supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 25 mm proximity transducer system |
| Case / exit option | 04 - smooth 1.06 in diameter case, side-exit cable |
| Unthreaded length | 000 - smooth-case configuration |
| Overall case length | 023 - 2.3 in |
| Total probe length | 10 - 1.0 m (3.3 ft) |
| Cable option | 01 - stainless-steel armor |
| Agency approval selection | 05 - multiple approvals; verify delivered marking and applicable conditions |
| System scale factor | 0.787 V/mm (20 mV/mil) under documented system conditions |
| Linear range | 12.7 mm (500 mils) under documented system conditions |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Model-relevant engineering themes
The clamp must hold the smooth case securely without distorting it, while the side-exit cable keeps its bend clearance and can be serviced.
Verify target collar geometry, material, probe orientation and expected axial travel before setting the operating position or accepting the monitor trend.
Stop and release boundary
Do not clamp, route or zero this probe from nominal dimensions alone. Stop until the installation drawing establishes the case position, side-exit clearance, target travel and complete nine-metre system.
Supported user task
Used in supported 3300 XL 25 mm long-range position and differential-expansion measurements where a smooth side-exit probe and armored one-metre lead fit the mechanical arrangement.
Buyer, installer and engineer situations
Use the manufacturer-supported clamp or bracket arrangement for the 1.06-inch smooth case. Confirm grip length, case position and service access without crushing or distorting the probe body.
Allow the cable to leave the 2.3-inch case without a sharp bend, bracket interference or connector load. Check the full movement and maintenance envelope on the machine drawing.
Only if that produces the documented total for the selected system. In the normal nine-metre arrangement, use the supported extension cable that completes the one-metre lead to nine metres.
Confirm collar geometry, target material, probe orientation, initial position and expected travel, then use the official mechanical verification and zero procedure. Stop if the travel could leave the linear range.
Match the delivered marking to the applicable certificate, area classification, enclosure, wiring, temperature and special installation conditions. Do not treat the suffix alone as approval.
Send the complete code, bracket and target drawings, expected travel, required total system length, cable route, area and approval needs, quantity, destination and clear label photographs.
ApterPLC supply capability
New original supply: Quality-focused sourcing and exact-model checks help protect the purchase decision.
Current, discontinued and scarce products: Our supply network supports routine and difficult-to-source automation parts.
Responsive after-sales service: We assist with delivery coordination, receipt questions and post-purchase technical communication.
Buyer search terminology
Search note: Common spelling, spacing and separator variants are listed for discovery only. Use the exact Product Model above for quotation and ordering.
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
The official manufacturer publication was reduced only by removing pages unrelated to this exact model. The cover, identity, scope, required preceding context and useful model pages remain in their original order as complete pages.
Source: Bently Nevada 163236 Rev. M
Retained official pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 28
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
