Match the nine-metre chain
Use supported 25 mm probe and extension-cable lengths that total nine metres.
Item NO.:
330850-90-05Order(MOQ):
1Goods Stock:
29Payment:
T/TLead Time：
In stockWeight:
0.22KGDimension:
7.8x6x6.5cmDescription:
PROXIMITY SENSORPrice:
AskSend the complete nameplate, installed system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
Exact-model engineering context
Differential-expansion channels require both a long linear measurement range and a mechanically verified target arrangement. 330850-90-05 is the panel-mount Proximitor Sensor for a nine-metre 3300 XL 25 mm system.
The 05 selection adds an approval-control task at receiving and installation. The order code alone is not the complete compliance record; the delivered marking, certificate conditions, area classification, enclosure and wiring method must agree.
Before energizing the channel, verify the supported 25 mm probe and extension-cable total, panel footprint, terminals, supply, target material and expected travel. Diagnose mechanical alignment and the transducer chain before changing monitor span or zero.
Selection and installation decisions
Use supported 25 mm probe and extension-cable lengths that total nine metres.
Confirm collar geometry, material, probe orientation and the expected movement before setting the operating position.
Match the 05 delivered marking and certificate conditions to the site installation.
Official configuration and supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 25 mm proximity transducer system |
| Product type | Proximitor Sensor |
| System length | 90 - 9.0 m |
| Mounting option | 0 - panel mount |
| Agency approval selection | 05 - multiple approvals; verify delivered marking and applicable conditions |
| Incremental scale factor | 0.787 V/mm (20 mV/mil) under documented system conditions |
| Linear range | 12.7 mm (500 mils) under documented system conditions |
| Primary measurement task | Supported differential-expansion and long-range position measurement |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Model-relevant engineering themes
Set the operating position only after the target geometry, expected axial travel, probe orientation and system zero procedure have been verified.
Approval acceptance depends on the delivered marking and all applicable certificate, enclosure, area and wiring conditions, not the 05 suffix alone.
Stop and release boundary
Do not commission from the monitor display alone. Stop when target geometry, expected travel, nine-metre chain, panel wiring or approval conditions remain unresolved.
Supported user task
Designed for supported long-range position measurements such as turbine differential expansion when used with the matched 3300 XL 25 mm probe, cable, target arrangement and monitor channel.
Buyer, installer and engineer situations
No. The supported probe lead and extension cable must total nine metres for this sensor. Re-select the official component lengths rather than compensating in the monitor.
Confirm collar or target geometry, material, probe orientation, initial position and expected travel. These determine whether the documented range can be used without leaving the linear region.
Check the delivered marking, applicable certificate conditions, area classification, enclosure, wiring method, temperature limits and installation drawing. The suffix alone is not site acceptance.
Check target alignment and condition, probe position, the nine-metre component total, connector seating, supply and field wiring before altering zero, span or alarm settings.
Only after the mounting-hole pattern, enclosure depth, terminal access, grounding and cable bend space are confirmed. Also verify that the old transducer chain is the supported nine-metre 25 mm system.
Provide the full probe, cable and sensor labels, target drawing, expected travel, panel photographs, required approval and area details, quantity and destination.
ApterPLC supply capability
New original supply: Quality-focused sourcing and exact-model checks help protect the purchase decision.
Current, discontinued and scarce products: Our supply network supports routine and difficult-to-source automation parts.
Responsive after-sales service: We assist with delivery coordination, receipt questions and post-purchase technical communication.
Buyer search terminology
Search note: Common spelling, spacing and separator variants are listed for discovery only. Use the exact Product Model above for quotation and ordering.
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
The official manufacturer publication was reduced only by removing pages unrelated to this exact model. The cover, identity, scope, required preceding context and useful model pages remain in their original order as complete pages.
Source: Bently Nevada 163236 Rev. M
Retained official pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 30
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
