Selection
- Confirm the channel really requires the 11 mm range and 9.0 m total length.
- Check the panel-mount arrangement and retain the CN suffix from the installed label.
Item NO.:
330780-90-CNOrder(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.55KGDimension:
7.8x3x6.2cmDescription:
PROXIMITY SENSORPrice:
AskA 9.0 m panel-mount Proximitor Sensor for a matched 3300 XL 11 mm proximity transducer chain.
Built for wider-range non-contact measurements, this 330780 configuration conditions the signal from a matched 3300 XL 11 mm probe and extension cable. Common applications include thrust position, ramp differential expansion, rod position and other measurements where the 8 mm system does not provide enough linear range.
Code 90 identifies a 9.0 m system length with panel-mount hardware. The probe lead and extension cable must add up to that total, and the monitor channel must be configured for the 11 mm system’s 3.94 V/mm scale factor rather than an 8 mm setting.
The CN suffix should be carried exactly as shown on the supplied label or purchase record; the current official ordering table does not define it. That suffix caution does not change the documented 330780-90 core configuration or its matching requirements.
The 4 mm linear range supports wider position measurements such as thrust position, differential expansion, rod position and other applications listed for the 11 mm system.
Add the probe lead and extension cable lengths; their total must match the 9.0 m configuration of the Proximitor Sensor.
Use the documented 3300 XL 11 mm probe and extension cable whose combined length matches the sensor configuration. Connector appearance alone does not establish a calibrated measurement chain.
Set the channel for the 3.94 V/mm scale factor, correct engineering units and measurement direction, then establish alarm levels from the approved machinery strategy.
Inspect probe gap, target position, cable continuity, connector seating, supply and the exact 9 m component combination before condemning the sensor.
The CN suffix should be copied from the installed nameplate or purchase record and retained in the full model string because its meaning is not defined in the current ordering table.
Products supplied by ApterPLC are covered for 12 months under the applicable sales terms. The complete nameplate and transaction record help our team identify the exact unit when support is needed.
This Bently Nevada document covers system performance and 330780 ordering information for 330780-90-CN. It provides a practical reference for model selection, installation planning and maintenance.
|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
