Selection
- Confirm the intended chain is 5 m with a 1 m probe.
- Select code 03 when both armor and connector protectors are required.
Item NO.:
330730-040-03-00Order(MOQ):
1Goods Stock:
16Payment:
T/TLead Time:
In stockWeight:
0.25KGDimension:
7.8x3x6.2cmDescription:
EXTENSION CABLEPrice:
AskA 4.0 m armored 11 mm-system extension cable with connector protectors and no approval requirement.
A 1.0 m probe paired with the 4.0 m length of 330730-040-03-00 forms a common 5.0 m 3300 XL 11 mm measurement chain. This makes the cable useful for wider-range installations built around a matching 330780 Proximitor Sensor.
Code 03 combines mechanical armor with protectors at the ClickLoc joints, giving 330730-040-03-00 more complete route protection than an armored-only cable. Clean assembly and sensible bend control still matter because the connection remains part of the calibrated signal path.
The cable belongs specifically to the 11 mm system, whose 4 mm range and 3.94 V/mm scale differ from the 8 mm family. Keeping 330730-040-03-00 within that matched probe, cable and sensor chain avoids an otherwise plausible-looking but electrically incorrect combination.
It commonly combines with a 1.0 m 11 mm probe to make the 5.0 m total required by a matching 330780 sensor. Calculate the installed total rather than selecting by cable length alone.
Support the armored route, keep both ClickLoc joints clean and fully seated, assemble the protectors without trapping contamination and avoid tight bends where the cable enters each protector.
No. It belongs to the 3300 XL 11 mm chain and must be used with a compatible 11 mm probe and 330780 sensor. The range and scale differ from the 8 mm system.
Record continuity, total system length, both protector conditions, sensor supply, static gap voltage, channel scale and dynamic response at the selected machine baseline.
A wrong probe-plus-cable total, incorrect sensor family, poor gap, contaminated connector or wrong channel scale can produce a bad system result. Check the complete chain before replacing the cable.
Confirm 4.0 m length, armored code 03 construction, both connector protectors, approval code 00 and undamaged ClickLoc ends before storing it as a 5 m-system spare.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete nameplate, original packaging and transaction record so the exact unit and revision can be identified during support.
Support: sales1@apterpower.com · +8618020776782
Use this document to confirm the 4.0 m armored 3300 XL 11 mm extension cable, protector option, system-length matching, cable specifications and connector drawings.
Download the 330730-040-03-00 filtered official datasheet|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :