Temperature-zone review
- Separate the probe-tip temperature from the lead and connector temperature.
- Do not apply the +260 °C cable limit to the probe tip.
- Rate the completed chain by its lowest-temperature component.
Item NO.:
330194-17-25-15-00Order(MOQ):
1Goods Stock:
13Payment:
T/TLead Time：
In stockWeight:
1.3KGDimension:
7.6x5.1x35.6cmDescription:
PROXIMITY SENSORPrice:
AskAn armored M10 × 1 Extended Temperature Range probe with a 170 mm unthreaded section, 250 mm case, 1.5 m total length and the no-approval option.
Two thermal zones define how 330194-17-25-15-00 is applied: the probe tip is rated from −52 to +218 °C, while its ETR cable and connector are rated from −51 to +260 °C.
System length for 330194-17-25-15-00 can be completed with a 3.5 m extension cable for a 5 m chain or a 7.5 m extension cable for a 9 m chain.
Mechanically, 330194-17-25-15-00 combines flexible stainless-steel armor, an M10 × 1 body, a 170 mm unthreaded section, a 250 mm case and a 1.5 m probe length; its ending 00 provides no agency approvals.
The probe tip and the lead or connector have separate exposure limits. The upper limit is +218 °C at the probe tip and +260 °C for the ETR cable and connector.
The 1.5 m probe plus a 3.5 m cable forms a 5 m chain, not 9 m. A 7.5 m extension cable is the supported length for the 9 m Proximitor Sensor; component temperature ratings remain separate.
An ETR probe can operate with a compatible standard-temperature extension cable, including a 330130 cable. Each component remains subject to its own temperature rating, so the lower-rated part sets the practical limit for its location.
A measurement chain containing any ETR component follows the ETR-system performance limits. That basis applies even when the other compatible components are standard-temperature versions.
The ETR temperature rating does not provide hazardous-area certification. This exact configuration ends in 00 and carries no agency approvals, so a classified installation needs an appropriately approved order code.
The operating range and the pressure-seal warning address different limits. Exposure below −34 °C can shorten pressure-seal life, so a low-temperature pressure-boundary application needs its own engineering assessment.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the product nameplate, original packaging and transaction record available if warranty support is required.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
