Selection
- Confirm the M8 × 1 mount and that the 5 mm tip is required by the available space.
- Measure the 40 mm unthreaded section and 80 mm reach against the bracket drawing.
Item NO.:
330173-04-08-10-02-00Order(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.55KGDimension:
7.8x3x6.2cmDescription:
PROXIMITY PROBESPrice:
AskAn M8 × 1 probe with a 40 mm unthreaded section, 80 mm case and 1.0 m lead for compact machinery measurements.
The smaller 5 mm probe tip is useful when an 8 mm probe is too large for the available mounting space. In a matched 3300 5 mm system it measures shaft vibration and position on fluid-film bearing machines and can also serve Keyphasor or speed applications.
This metric version uses an M8 × 1 body, a 40 mm unthreaded length, an 80 mm overall case and a 1.0 m lead. The miniature ClickLoc connection is supplied on standard cable without a protector, and the ordering code specifies no agency approval option.
Compact geometry does not make the installation forgiving. The bracket, target area, insertion depth and cable route must be checked together, then the probe, extension cable and Proximitor Sensor must remain the documented 5 mm system combination.
The 5 mm tip and M8 × 1 body suit restricted machine locations where the 40 mm unthreaded section and 80 mm case match the available mechanical reach.
It changes how the probe passes through a bracket or housing and where thread engagement begins, so it must match the mechanical drawing.
Use the documented 3300 5 mm probe, extension cable and Proximitor Sensor combination so the installed scale, linear range and frequency response remain consistent with the official system data.
A flexible or loose bracket moves relative to the machine and can appear as shaft motion. Check stiffness, fasteners and resonance during installation.
Review target runout, probe gap, bracket motion, cable routing, connector seating and channel filtering under the same operating condition.
Keep the bracket location, insertion depth, final gap voltage, cable route, connected sensor and a stable machine speed and load reference so later signal changes can be evaluated in context.
Products supplied by ApterPLC are covered for 12 months under the applicable sales terms. The complete nameplate and transaction record help our team identify the exact unit when support is needed.
This Bently Nevada document covers system description, performance and 330173 ordering information for 330173-04-08-10-02-00. It provides a practical reference for model selection, installation planning and maintenance.
|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
