Length completion
Treat the 8.0 m cable as one part of the complete electrical system length.
Item NO.:
330130-080-01-00Order(MOQ):
1Goods Stock:
15Payment:
T/TLead Time：
In stockWeight:
0.55KGDimension:
24.3x4.6x15.5cmDescription:
PROBEPrice:
AskAn 8.0 m armored extension cable for a matched 3300 XL 8 mm proximity transducer system.
330130-080-01-00 is the armored extension-cable configuration in the 3300 XL 8 mm proximity transducer family. The 080 field specifies an 8.0 m cable.
Option 01 identifies armored cable construction, while option 00 is the published no-approval-required selection. Electrical length must be checked as a complete probe, extension cable and Proximitor Sensor chain.
Connector fit alone does not establish a correct transducer-system match; use the complete labels from all three connected components.
Treat the 8.0 m cable as one part of the complete electrical system length.
Confirm bend radius, connector clearance and the routed armored section.
Keep the probe, extension cable and Proximitor Sensor family together.
| Manufacturer | Bently Nevada |
|---|---|
| Component | Extension cable |
| System family | 3300 XL 8 mm proximity transducer system |
| Cable length | 8.0 m |
| Cable construction | Armored cable |
| Approval option | 00 — not required |
| Selection rule | Probe lead + extension cable must equal Proximitor Sensor system length |
| Cable type | 75 Ω triaxial, FEP insulated |
| Armor construction | Flexible AISI 302 or 304 stainless steel with FEP outer jacket |
| Standard system lengths | 5 m or 9 m including probe lead and extension cable |
| Operating and storage temperature | -52°C to +177°C (-62°F to +350°F) |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Connector material | Gold-plated brass or gold-plated beryllium copper |
| Maximum connector torque | 0.565 N·m (5 in·lbf) |
| Connector tensile strength | 270 N (60 lbf), maximum rated |
| Armored cable linear mass | 103 g/m (1.5 oz/ft) |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Yes. The 8.0 m extension cable and 1.0 m probe lead form the 9 m electrical length used by the matching Proximitor Sensor.
Connector fit is not enough. The 3300 XL 8 mm probe, 8.0 m cable and Proximitor Sensor must belong to the same matched electrical system.
Its stainless-steel armor is intended for protected routing, while the 25.4 mm minimum bend radius still needs to suit the available path.
The electrical length can remain 8.0 m, but the armored construction changes stiffness, routing clearance and handling at the connectors.
Start with the total probe-plus-cable length and the three component labels; a mismatched system length can invalidate the expected scale relationship.
The cable label, both connector ends, probe lead length and Proximitor Sensor model establish the required 8.0 m armored configuration.
Share the exact nameplate, mounting or route dimensions, connected component labels and approval documents. ApterPLC can then prepare a model-focused quotation without treating a similar connector or family name as proof of interchangeability.
ApterPLC provides a one-year warranty on this item, giving buyers a clear support path after delivery.
Apter sells industrial automation parts through independent channels and is not an authorized distributor, dealer or representative of the brands shown. Product names, images and trademarks are used for identification only.
This model-specific PDF brings together the relevant Baker Hughes ordering-code and technical pages for 330130-080-01-00. Use it to verify the 8.0 m cable length, armored construction, approval option and complete matched transducer chain before ordering or replacement.
Open the 330130-080-01-00 Datasheet (PDF)|
128229-01 |
990-04-XX-01-00 |
330180-91-05 |
|
135137-01 |
990-05-50-02-00 |
330980-71-CN |
|
330500-02-04 |
990-05-50-02-01 |
330930-040-00-00 |
|
330180-50-00 |
990-05-50-02-05 |
330930-060-00-00 |
|
330180-50-05 |
990-08-XX-01-00 |
330130-080-00-00 |
|
330180-90-00 |
990-08-XX-01-00 |
330130-085-00-00 |
|
330400-02-05 |
990-04-50-01-00 |
330190-035-00-00 |
|
102045-040-00 |
990-04-50-02-00 |
3500/25 149369-01 |
|
330130-080-10-05 |
990-05-XX-01-00 |
3500/32 125712-01 |
|
330130-080-10-05 |
9200-06-05-05-00 |
330103-00-06-10-02-00 |
|
330930-045-00-CN |
990-04-50-02-CN |
330106-05-30-05-02-00 |
|
3500/45 176449-04 |
990-05-XX-01-CN |
330103-00-03-10-02-00 |
|
3500/42M 176449-02 |
990-05-XX-01-CN |
330104-07-12-10-02-CN |
|
330171-00-08-10-02-CN |
990-04-XX-01-CN |
330101-00-17-10-02-CN |
|
330704-000-050-10-01-05 |
330854-040-24-05 |
330703-000-060-50-12-00 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
