Selection
- Match the complete part number, M10 x 1 reverse-mount geometry and 5 m system architecture.
- A 5 m probe is intended for use with a 5 m Proximitor Sensor; do not add an extension cable unless the documented system design requires one.
Item NO.:
330106-05-30-50-02-00Order(MOQ):
1Goods Stock:
9Payment:
T/TLead Time：
In stockWeight:
0.32KGDimension:
113x1.8x1.5cmDescription:
PROBEPrice:
AskM10 x 1 reverse-mount 3300 XL 8 mm probe with a 5.0 m integral lead and standard ClickLoc connector.
330106-05-30-50-02-00 is a Bently Nevada 3300 XL 8 mm reverse-mount proximity probe with an M10 x 1 mounting thread.
The 330106-05-30 base geometry uses a fixed 5 mm unthreaded length and 30 mm case length. Code 50 specifies a 5.0 m total probe length, code 02 specifies the miniature ClickLoc coaxial connector on standard cable, and code 00 indicates that no agency approval option is required.
This listing is for the probe configuration only. Selection should be checked against the installed Proximitor Sensor, mounting geometry, target material and the complete measurement chain.
Yes, when it is paired with the documented 5 m Proximitor Sensor. Its 5 m integral lead is already the complete transducer-system length, so a standard extension cable is not added in this arrangement.
This reverse-mount configuration has no armor or connector-protector option. We recommend using a protected route that respects the cable bend radius, or selecting a manufacturer-documented probe arrangement that provides the required mechanical protection.
Target material, installed gap and the connected Proximitor Sensor all affect the result. The published system performance is based on an AISI 4140 steel target, so compare those conditions before changing monitor settings.
This exact configuration uses approval code 00, meaning that an agency approval option is not required. It should not be treated as a hazardous-area-approved configuration; select an appropriately approved model when the site classification requires one.
The 3300 XL 8 mm system supports component interchangeability when the probe, Proximitor Sensor, system length and other configuration boundaries are all correct. The complete installed-system record remains the safest basis for the spare decision.
Maintain at least the published 25.4 mm cable bend radius and keep mechanical load away from the ClickLoc connection. This protects the signal path without adding unlisted armor or a connector protector.
The supplied product is covered for 12 months under ApterPLC sales terms. Retain the complete product label, original packaging and transaction record so the exact unit can be identified quickly if warranty support is needed.
Includes the manufacturer cover, system specifications, ordering-code table and reverse-mount drawings.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
