Mounting fit
Confirm M10 × 1 engagement and 80 mm case clearance.
Item NO.:
330104-00-08-10-02-CNOrder(MOQ):
1Goods Stock:
11Payment:
T/TLead Time：
In stockWeight:
1.74KGDimension:
25.5x11.6x9.5cmDescription:
PROBEPrice:
Ask330104-00-08-10-02-CN is the complete Bently Nevada ordering code for this configuration. An armored metric probe with 0 mm unthreaded length, 80 mm case, 1.0 m lead, standard ClickLoc connector and China approval option.
For 330104-00-08-10-02-CN, confirm the coded mounting geometry, cable or lead construction, connector option and system length against the installed measurement chain.
Before quoting 330104-00-08-10-02-CN, ApterPLC checks the full nameplate and connected-component labels so a visually similar part is not treated as an exact replacement.
Confirm M10 × 1 engagement and 80 mm case clearance.
Option 02 has no connector protector; plan field protection if required.
Keep the CN suffix and supplied China documentation with the order.
| Manufacturer | Bently Nevada |
|---|---|
| Product family | 3300 XL 8 mm |
| Component | Proximity probe |
| Thread | M10 × 1 |
| Armor | Flexible AISI 302/304 stainless steel with FEP outer jacket |
| Unthreaded length | 00 · 0 mm |
| Overall case length | 08 · 80 mm |
| Total probe length | 10 · 1.0 m |
| Connector / cable | 02 · standard ClickLoc; no connector protector |
| Country-specific approval | CN · China option |
| Measurement principle | Non-contacting eddy current proximity measurement |
| Nominal linear range | 2.0 mm (80 mils) |
| Nominal sensitivity | 7.87 V/mm (200 mV/mil) |
| Frequency response | 0 to 10 kHz (+0 / -3 dB) |
| Reference target | Bently Nevada AISI 4140 steel |
| Minimum flat target | 15.2 mm diameter |
| Minimum shaft diameter | 50.8 mm; 76.2 mm recommended |
| Minimum cable bend radius | 25.4 mm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
An armored metric probe with 0 mm unthreaded length, 80 mm case, 1.0 m lead, standard ClickLoc connector and China approval option. Confirm every coded length, thread, cable and approval option against the installed probe.
No. Thread size alone does not confirm case length, unthreaded length, lead construction, connector option or approval suffix.
Confirm M10 × 1 engagement and 80 mm case clearance.
Option 02 has no connector protector; plan field protection if required. Keep the CN suffix and supplied China documentation with the order.
Send a clear nameplate photo for 330104-00-08-10-02-CN, the complete order code, connected-component labels and photos of the installed mounting or cable route.
ApterPLC provides a one-year warranty on this item, with a clear support path after delivery.
Apter sells industrial automation parts through independent channels and is not an authorized distributor, dealer or representative of the brands shown. Product names and trademarks are used for identification only.
Use the model-relevant document below to review the configuration, installation details and system requirements for 330104-00-08-10-02-CN.
|
330180-50-00 |
84661-30 |
330130-040-00-00 |
|
330180-51-00 |
84661-25 |
330130-040-00-05 |
|
128031-01C |
330130-035-00-00 |
991-01-XX-01-05 |
|
170180-01-05 |
330130-030-01-CN |
990-08-XX-01-00 |
|
330400-02-CN |
330130-035-00-CN |
400100-100-02 |
|
330130-035-01-CN |
330101-00-12-10-02-05 |
330730-040-01-00 |
|
330130-040-00-CN |
330101-00-16-10-02-00 |
3500/50 133388-02 |
|
330106-05-30-15-02-00 |
330101-00-19-10-02-00 |
330876-02-50-00-00 |
|
330106-05-30-10-02-00 |
330104-00-20-10-02-00 |
130944-01 128275-01F |
|
330106-05-30-10-02-05 |
330104-00-25-05-02-00 |
330104-00-06-10-02-00 |
|
330106-05-30-05-02-00 |
330104-10-18-10-01-00 |
330103-00-14-05-02-00 |
|
330105-02-12-50-02-00 |
330101-00-08-05-02-00 |
330103-00-02-10-02-05 |
|
330106-00-04-10-02-00 |
330103-03-12-05-02-00 |
330106-05-30-10-02-CN |
|
330103-00-06-10-02-00 |
330106-05-30-15-02-CN |
330710-000-060-10-02-00 |
|
330709-000-050-10-02-00 |
330106-05-30-05-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
