Selection
- Match the 50 mm unthreaded section, 150 mm case, M10 x 1 thread and 0.5 m lead to the installation.
- Select the extension cable and Proximitor Sensor as a complete 3300 XL 8 mm system.
Item NO.:
330103-05-15-05-02-00Order(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.06KGDimension:
2x1.5x58cmDescription:
PROXIMITY PROBESPrice:
AskM10 x 1 standard-mount 3300 XL 8 mm probe with no armor, 50 mm unthreaded length, 150 mm case and 0.5 m lead.
330103-05-15-05-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with M10 x 1 threads and no armor.
The part number specifies a 50 mm unthreaded length, 150 mm overall case length, 0.5 m total probe length, the standard-cable ClickLoc connector and no required agency approval option.
The 50 mm unthreaded section is 100 mm shorter than the case and therefore satisfies the ordering rule that the unthreaded length must be at least 20 mm shorter than the case length.
Select the extension cable and Proximitor Sensor as one 3300 XL 8 mm system so the complete calibrated length is correct. The 0.5 m probe lead by itself does not define the finished measurement chain.
The mounting arrangement must accommodate the 150 mm case and 50 mm unthreaded section while preserving access to the cable exit. Use the machine drawing to confirm that the long body clears adjacent hardware through the full operating condition.
Limit thread engagement to the published 15 mm maximum and confirm the stop position against the machine drawing. This protects the long-case geometry from an apparently correct but overly deep threaded hole.
This exact configuration uses approval code 00, so an agency approval option is not required. A hazardous-area installation should use a configuration whose approval option and supplied-unit markings satisfy the site requirement.
Mechanical mounting position and target condition can change during service. Compare the installed gap and baseline voltage before changing channel settings; standard radial-vibration guidance is approximately -9 V when the documented system conditions apply.
The published system accuracy and interchangeability are referenced to an AISI 4140 steel target. A different target material requires an application-specific calibration decision rather than assuming the standard figures still apply.
The supplied product is covered for 12 months under ApterPLC sales terms. Retain the complete product label, original packaging and transaction record so the exact unit can be identified quickly if warranty support is needed.
Share a clear product label and the document type you need. Our team will compare the available manufacturer material and help identify the most relevant file for this exact configuration.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
