Selection
- Measure the available thread depth and connector clearance before choosing the 20 mm case.
- Match the probe to the extension cable and 330180 Proximitor Sensor required by the installed total system length.
A short-case M10 × 1 probe with a 20 mm body, 1.0 m lead and standard ClickLoc connector for matched 3300 XL 8 mm measurement chains.
Item NO.:
330103-00-02-10-02-00Order(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.06kgDimension:
117x2x2cmDescription:
3300 XL 8 mm Metric Proximity ProbePrice:
AskA short-case M10 × 1 probe with a 20 mm body, 1.0 m lead and standard ClickLoc connector for matched 3300 XL 8 mm measurement chains.
This compact metric probe is intended for bearing housings and brackets where an M10 × 1 thread and a short 20 mm case fit the available mounting depth. The 8 mm tip supports non-contact shaft vibration and position measurement in a matched 3300 XL system. The short mechanical envelope is the defining installation advantage of 330103-00-02-10-02-00.
Its ordering code combines zero unthreaded length with a 20 mm overall case, a 1.0 m integral lead and a miniature ClickLoc connector on standard cable. The code 00 suffix specifies that no agency approval option is selected. Those five option fields identify 330103-00-02-10-02-00 as a specific probe, not just a 330103 family reference.
Short geometry leaves little room for a casual retrofit assumption. Confirm thread engagement, insertion depth, connector clearance and total system length at the machine, then compare the replacement gap voltage and vibration data with the recorded baseline. Recording 330103-00-02-10-02-00 with the matched cable and sensor protects the next maintenance decision.
It suits shallow metric brackets or bearing housings that provide enough M10 × 1 engagement without requiring a long probe body. Measure the actual hole and target reach before ordering.
The threaded section reaches close to the tip, so an incorrect hole depth can bottom the probe or leave the tip at the wrong target clearance. Verify usable thread depth and insertion range.
Not necessarily. Add the correct extension cable and use the Proximitor Sensor calibrated for the resulting total system length.
The probe may share the same thread while using a different cable length, connector option or sensor calibration. Match the full part number and measurement chain.
Inspect bracket rigidity, cable support, connector seating, grounding and target condition before changing filters or alarm settings.
Keep gap voltage, vibration amplitude, phase if used, speed, machine load and the exact chain part numbers.
Products supplied by ApterPLC are covered for 12 months under the applicable sales terms. Keep the complete unit nameplate and transaction record so the exact product can be identified during technical support.
The attached selection contains the official description, performance data, environmental limits, ordering codes and product drawings relevant to 330103-00-02-10-02-00. Unrelated catalog pages have been removed.
|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
