Item NO.:
3300XL 8MMOrder(MOQ):
1Goods Stock:
26Payment:
T/TLead Time：
In stockWeight:
0.1KGDimension:
20.5x22.5x3.5cmDescription:
PROXIMITOR SYSTEMPrice:
AskExact-model industrial support
3300 XL 8 mm Proximity Transducer System
Send the full nameplate, rack or system context, required quantity and destination. We will review the exact identity before quotation.
3300XL 8MM is a matched eddy-current proximity measurement chain consisting of a 3300 XL 8 mm probe, extension cable and Proximitor Sensor. The complete system converts probe-to-target distance into a voltage suitable for radial vibration and position measurements.
3300XL 8MM is selected by total electrical length, probe mechanical configuration, cable protection, connector style and approval option. System performance depends on using components that produce the documented five- or nine-metre electrical length and on setting the probe gap within the usable linear range.
Probe, extension cable and Proximitor Sensor form one calibrated electrical chain.
The ordered probe and extension cable must add to the supported total electrical system length.
The system provides the manufacturer-defined linear range and scale factor for common shaft vibration and position measurements.
A connector that fits does not prove that the probe, extension cable and Proximitor Sensor form the correct electrical length. Confirm all three part numbers before installation or calibration.
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm Proximity Transducer System |
| Product type | Proximity Transducer System |
| Product model | 3300XL 8MM |
| System components | Probe, extension cable and Proximitor Sensor |
| Total electrical lengths | 5.0 m or 9.0 m |
| Nominal system scale factor | 7.87 V/mm (200 mV/mil) |
| Nominal linear range | 2.0 mm (80 mil) |
| Frequency response | 0 to 10 kHz |
| Probe temperature range | -51°C to +177°C (-60°F to +351°F) |
| Standard extension-cable range | -51°C to +177°C (-60°F to +351°F) |
| Proximitor Sensor range | -51°C to +100°C (-60°F to +212°F) |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Choose a probe and extension cable whose electrical lengths total 5 or 9 m, then match the Proximitor Sensor system-length option. Do not add generic cable to solve reach.
Seat and protect the connectors, route cable above the minimum bend radius, set the mechanical gap and verify the output before the monitor channel is armed.
Only after all three component codes are checked as a matched five- or nine-metre electrical system. Confirm connector family, cable length and Proximitor Sensor length option before reconnecting the chain.
A changed total cable length, incompletely seated connector or disturbed probe gap can move the output. Reseat and protect the connectors, verify the component codes and restore the documented gap before changing monitor scaling.
Use only the manufacturer extension cable selected to make the complete probe-plus-cable electrical length 5 or 9 m. Do not splice or add generic cable; if the required route cannot meet a supported length, stop and revise the selection.
Confirm target material and geometry, probe orientation, side/rear clearance and the required measurement travel. Set the operating point only after the mechanical installation can keep the signal inside the usable linear range.
No. Approval depends on the ordered probe, cable and sensor configuration and the installation conditions. Use the complete component codes and project certification requirement rather than the family name alone.
Send the three installed part numbers, total system length, probe thread and case dimensions, cable armor/connector needs, approvals, quantity and clear label photographs. This prevents a single compatible-looking component from being quoted as a complete system.
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names, product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
No verified model-specific English PDF is being offered in this tab. Send the complete nameplate and installed-system context so the required manufacturer document can be checked before supply.
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
