Item NO.:
18622-030-01Order(MOQ):
1Goods Stock:
36Payment:
T/TLead Time：
In stockWeight:
0.96KGDimension:
27x27x4cmDescription:
EXTENSION CABLEPrice:
AskAcceleration Transducer System · Exact-model review for engineering and procurement decisions.
|
Confirm the installed configuration before ordering
Manager JimPei · Model, nameplate and technical-document review
|
Email: sales1@apterpower.com WhatsApp: +8618020776782 |
18622-030-01 is the configured Bently Nevada standard extension cable for the documented acceleration-transducer system. The ordering code identifies a 30 ft cable and the armored standard-cable option, providing the specified link between compatible system components.
18622-030-01 should be selected from the required routed length and protection need, not from connector appearance alone. Its armor protects the standard cable mechanically; it does not make this configuration the radiation-resistant cable option listed separately by the manufacturer.
Exact 30 ft length codeThe 030 selection defines a thirty-foot extension cable in the official ordering structure. |
Armored standard constructionThe 01 option identifies standard cable with armor for added mechanical protection. |
System-chain componentExtends the documented acceleration-transducer connection and is not a complete measuring system by itself. |
Suffix 01 identifies the armored standard cable, while the manufacturer lists separate radiation-cable options. If the installation is in a radiation environment, stop and verify the required ordering option instead of assuming that metallic armor provides radiation qualification.
| Manufacturer | Bently Nevada |
|---|---|
| Product family | 18622 Extension Cable |
| System context | Acceleration Transducer System |
| Ordering structure | 18622-A-B |
| Length option A | 030 = 30 ft |
| Cable option B | 01 = standard cable with armor |
| Radiation option | Not selected by suffix 01 |
| Product role | Extension cable within a compatible transducer chain |
Commercial packing weight and packed dimensions remain in the page logistics fields unless the manufacturer publishes model-specific packing data.
Installation & IntegrationPlan the thirty-foot route before installation, preserve connector alignment and prevent the armored cable from being crushed or bent sharply. Confirm both connected system components before removing the existing cable. |
Diagnostics & MaintenanceIf the signal changes after maintenance, inspect connector seating, armor damage, cable routing and the connected transducer/interface in sequence. Isolate the extension cable only after the complete chain has been identified. |
Cable-route confirmation: For a reliable quotation, send the exact cable code, required routed length, connector photographs, connected transducer and interface, armor requirement and any radiation-area requirement.
This code specifies a 30 ft armored standard extension cable. Do not change length from the spare route alone; first confirm the connected transducer, interface and manufacturer-defined cable arrangement, then select the official length that matches the system.
Yes. The 01 suffix is the armored standard-cable option. Inspect the armor, strain points and both connector ends before installation; reject or hold the cable if crushing, separation or connector damage is visible.
A partly seated connector, crushed armor, a sharp bend or strain at either endpoint can disturb the chain. Reseat and inspect the connectors, remove cable stress and test the channel again before changing monitor or interface settings.
No. Armor only defines mechanical protection; electrical compatibility still depends on the documented acceleration-transducer system. Match the transducer and interface part numbers before energizing the channel.
Identify both endpoints, record the route and clamp locations, photograph connector orientation and confirm that the thirty-foot replacement can be installed without excessive bend, pull or unsupported weight.
Provide the full cable code, connected transducer and interface labels, required routed length, armor requirement, environmental condition, connector photographs, quantity and destination.
Product identity and technical statements were checked against Bently Nevada Acceleration Transducer System ordering information for the 18622 extension-cable family. Verify the complete installed nameplate, revision, companion components and project drawing before commissioning.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
No verified model-specific English PDF is currently attached. Use these ApterPLC resources:
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
