Selection
- Confirm 15 ft reaches the panel without unsupported loops.
- Verify the 3-socket plug and terminal-lug wiring match the installed device.
Item NO.:
16925-15Order(MOQ):
1Goods Stock:
16Payment:
T/TLead Time：
In stockWeight:
1KGDimension:
7.8x3x6.2cmDescription:
INTERCONNECT CABLEPrice:
AskA 15 ft three-conductor shielded 22 AWG interconnect cable with a 3-socket plug and terminal-lug end.
Field vibration devices often need a straightforward connection from the sensor plug to panel terminals. At 15 ft long, 16925-15 provides that link for compatible Bently Nevada accelerometer and seismic-transmitter arrangements without leaving an excessive cable coil in a typical local run.
Three shielded 22 AWG conductors run from the 3-socket plug to individual terminal lugs, giving 16925-15 a clear plug-to-panel role. The shielded construction supports low-level signal wiring when polarity and shield treatment follow the connected device diagram.
Because it is an unarmored harness, 16925-15 is best suited to a protected tray, conduit or cabinet route with suitable strain relief. More exposed paths call for an armored alternative rather than relying on the electrical shield as mechanical protection.
It is a plug-to-terminal interconnect documented for compatible Bently Nevada vibration products, including applicable 330400/330425 accelerometer and seismic-transmitter arrangements. Confirm the exact device wiring drawing before use.
Measure the path from field device to panel so the cable reaches without tension or large unsupported coils. Provide strain relief and protected routing because this version has no armor.
Confirm the field device accepts the 3-socket plug and that the receiving panel uses the documented terminal-lug wiring. Verify polarity, shield treatment and power requirements from the device manual.
Check conductor and shield continuity before energizing, verify the expected static bias or loop value, then compare dynamic response at the same machine condition as the prior baseline.
Inspect socket engagement, pins, conductor continuity, shield condition, terminal-lug tightness and channel power. Correct wiring faults before replacing the sensor.
Choose the documented armored cable family when the route is exposed to mechanical damage. Also confirm that 15 ft is the required length rather than selecting by connector appearance alone.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete nameplate, original packaging and transaction record so the exact unit and revision can be identified during support.
Support: sales1@apterpower.com · +8618020776782
Use this document to confirm the 15 ft interconnect cable ordering length, cable construction and the official relationship to the supported accelerometer families.
Download the 16925-15 filtered official datasheet|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
