Item NO.:
16710-20Order(MOQ):
1Goods Stock:
28Payment:
T/TLead Time：
In stockWeight:
0.06KGDimension:
17.5x12x7.7cmDescription:
Interconnect CablesPrice:
Ask16710-20 is a Bently Nevada armored interconnect cable documented for supported accelerometer and seismic-transmitter measurement chains. The suffix 20 specifies a finished cable length of 20 ft, approximately 6.0 to 6.10 m.
16710-20 is a Bently Nevada armored interconnect cable documented for supported accelerometer and seismic-transmitter measurement chains. The suffix 20 specifies a finished cable length of 20 ft, approximately 6.0 to 6.10 m.
16710-20 uses a three-conductor shielded 22 AWG (0.5 mm2) construction with mechanical armor. The sensor end has a three-socket plug and the instrument end is terminated with lugs for field wiring.
16710-20 should be selected by complete part number, required cable length, connector arrangement, conductor construction, and the documented sensor system. It is not a 3300 XL proximity extension cable and should not be assumed compatible with the two-pin cable system used by the 330525 sensor.
The 20 suffix means a finished cable length of 20 ft, approximately 6.0 to 6.10 m. The selected route should allow that fixed length without treating the cable as a field-cut generic lead.
The sensor end uses a three-socket plug, while the instrument end is supplied with terminal lugs. Identifying both ends before routing helps preserve the intended field termination.
Official data list the 16710 cable family with 330400 and 330425 accelerometers and also reference it in 177230 and 330450 system documents. The installed device and channel design still determine the correct use.
No such use is documented. This cable has a three-conductor shielded plug-to-lug architecture, while a 3300 XL proximity extension cable uses a different triaxial connector system and electrical-length rule.
The armor provides mechanical protection, while the three-conductor shield and terminal lugs still need strain relief and a controlled route away from high-energy conductors. Shield termination should follow the documented channel design.
Review three-socket plug seating, terminal-lug assignment and tightness, conductor continuity, shield continuity, armor condition and routing, then compare the channel baseline under the same machine state.
The supplied product is covered for 12 months under ApterPLC sales terms. Keep the complete product label, original packaging and transaction record so the exact unit can be identified quickly if support is needed.
Use this selected official Bently Nevada document to review the ordering structure, configuration boundaries, interfaces, installation details and technical limits that apply to 16710-20.
|
3300/53 |
4454-156 |
1701/15 |
|
3300/21 |
16137-174 |
136294-01 |
|
990-04-XX-01-CN |
16137-177 |
330180-52-05 |
|
330354-040-24-05 |
330980-70-05 |
330104-00-06-10-02-00 |
|
330930-045-00-00 |
330180-92-05 |
330104-00-06-10-11-00 |
|
330130-070-00-CN |
177230-01-01-CN |
330104-00-07-05-02-00 |
|
3500/93 135799-02 |
330930-060-00-05 |
330103-11-19-10-02-00 |
|
3500/93 135785-02 |
3500/62 133811-03 |
330104-00-07-90-02-00 |
|
330103-05-15-05-02-00 |
3500/70M 140734-09 |
330104-00-08-05-02-00 |
|
330104-00-15-10-02-00 |
330905-08-13-10-02-05 |
330104-05-13-10-02-00 |
|
330106-05-30-50-02-00 |
330104-01-08-10-01-05 |
330104-05-15-05-02-00 |
|
330907-05-30-05-02-05 |
330101-00-20-05-02-05 |
330104-06-12-10-02-00 |
|
330106-05-30-20-02-CN |
330104-06-14-50-02-00 |
330104-10-18-10-01-00 |
|
330103-00-05-20-02-CN |
330103-00-04-10-12-00 |
330104-00-06-10-02-CN |
|
330851-02-000-030-10-00-05 |
330105-02-12-90-02-05 |
330104-00-07-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
