Selection
- Measure target reach and usable M10 x 1 engagement before choosing the 190 mm case.
- Match the 1.0 m probe lead with the correct extension cable and NSv Proximitor Sensor.
Item NO.:
330910-14-19-10-02-00Order(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.14KGDimension:
1.8x1.6x110cmDescription:
3300 XL NSv Metric Proximity ProbePrice:
AskAn armored M10 x 1 NSv probe with 140 mm unthreaded length, 190 mm case and a 1.0 m standard ClickLoc lead.
Bently Nevada 330910-14-19-10-02-00 is an armored M10 x 1 NSv proximity probe for non-contact shaft vibration and position measurements where a compact probe tip and restricted mounting clearance are important.
This configuration combines a 140 mm unthreaded reach, 190 mm case, 1.0 m integral lead and standard ClickLoc connector. The long, armored construction of 330910-14-19-10-02-00 suits deep brackets and demanding cable routes while retaining the 1.5 mm NSv system range.
For a correct replacement, 330910-14-19-10-02-00 must be matched with the NSv extension cable and Proximitor Sensor used by the installed total-length system. Buyers should also confirm target size, thread engagement, probe reach and connector clearance from the machine drawing.
Its approximately 5.2 mm NSv tip is useful where radial measurements involve shafts smaller than 51 mm or axial targets smaller than 15 mm. The choice should be based on the target geometry and the installed NSv signal chain, not tip size alone.
They define a 140 mm unthreaded section and a 190 mm overall case, creating a long-reach mechanical configuration. The bearing-housing drawing must leave enough M10 x 1 engagement, adjustment travel and connector clearance for that geometry.
No. A matching thread only addresses the mounting interface; this model belongs to the 3300 XL NSv system and must be paired with the correct extension cable and NSv Proximitor Sensor. Mixing probe families can change scale factor and linearity.
The published matched-system performance includes a 1.5 mm linear range, a nominal 7.87 V/mm scale factor and frequency response from 0 to 10 kHz. Those values apply to the complete NSv chain rather than the probe as an isolated component.
The armor gives the integral lead additional mechanical protection where routing passes through exposed or demanding machine areas. It still needs a bend radius of at least 25.4 mm and should not be used to carry the mechanical load of the long probe body.
It points to a measurement-chain or mechanical condition that should be resolved before alarm values are changed. Probe gap, target runout, bracket rigidity, ClickLoc seating, cable movement and the matched Proximitor supply are the most relevant diagnostic entry points.
Products supplied by ApterPLC are covered for 12 months under the applicable sales terms. Keep the complete unit nameplate, packing record and transaction details so the exact product can be identified during support.
The selected document contains the official product description, configuration data and engineering information relevant to 330910-14-19-10-02-00. Unrelated catalog pages have been removed where filtering was needed.
|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
