Item NO.:
330910-10-22-10-01-CNOrder(MOQ):
1Goods Stock:
26Payment:
T/TLead Time：
In stockWeight:
0.08KGDimension:
24.5x21x3.6cmDescription:
Proximity ProbesPrice:
Ask330910-10-22-10-01-CN is a standard-mount 3300 XL NSv armored proximity probe with an M10 x 1 thread. Its ordering code specifies 100 mm of unthreaded length and a 220 mm overall case length.
330910-10-22-10-01-CN is a standard-mount 3300 XL NSv armored proximity probe with an M10 x 1 thread. Its ordering code specifies 100 mm of unthreaded length and a 220 mm overall case length.
330910-10-22-10-01-CN has a 1.0 m integral lead and a miniature ClickLoc connector with a connector protector on standard cable. CN is a country-specific ordering option, so approval details must be confirmed from the supplied-unit markings.
330910-10-22-10-01-CN is one component of an NSv measurement chain and must be used with an appropriate NSv extension cable and Proximitor Sensor. Small-target size, side clearance, gap and cross-talk conditions require review during installation.
The NSv system is intended for installations where small targets, counterbore limits or restricted side or rear views make a standard 5 mm or 8 mm probe difficult to use. The actual target and clearance limits still need to match the NSv data.
No direct mixed-chain use is established. This is an NSv probe and should be matched with the documented NSv extension cable and NSv Proximitor Sensor of the correct total length.
The official migration path requires the complete measurement chain to move to NSv components. Changing only the probe would leave the extension cable and Proximitor outside the documented arrangement.
NSv performance depends on target size, side-view clearance and tip spacing. A commissioning plan should account for those dimensions because nearby probes or undersized targets can change the observed response.
A stable bias and repeatable response through the documented 1.5 mm linear range are the useful indicators. The result should be recorded with the actual target, gap and machine state.
Review the protected ClickLoc joint, 1 m lead continuity and cable route first, then verify the NSv extension cable, NSv Proximitor, target clearance and configured monitor channel.
The supplied product is covered for 12 months under ApterPLC sales terms. Keep the complete product label, original packaging and transaction record so the exact unit can be identified quickly if support is needed.
Use this selected official Bently Nevada document to review the ordering structure, configuration boundaries, interfaces, installation details and technical limits that apply to 330910-10-22-10-01-CN.
|
3300/53 |
4454-156 |
1701/15 |
|
3300/21 |
16137-174 |
136294-01 |
|
990-04-XX-01-CN |
16137-177 |
330180-52-05 |
|
330354-040-24-05 |
330980-70-05 |
330104-00-06-10-02-00 |
|
330930-045-00-00 |
330180-92-05 |
330104-00-06-10-11-00 |
|
330130-070-00-CN |
177230-01-01-CN |
330104-00-07-05-02-00 |
|
3500/93 135799-02 |
330930-060-00-05 |
330103-11-19-10-02-00 |
|
3500/93 135785-02 |
3500/62 133811-03 |
330104-00-07-90-02-00 |
|
330103-05-15-05-02-00 |
3500/70M 140734-09 |
330104-00-08-05-02-00 |
|
330104-00-15-10-02-00 |
330905-08-13-10-02-05 |
330104-05-13-10-02-00 |
|
330106-05-30-50-02-00 |
330104-01-08-10-01-05 |
330104-05-15-05-02-00 |
|
330907-05-30-05-02-05 |
330101-00-20-05-02-05 |
330104-06-12-10-02-00 |
|
330106-05-30-20-02-CN |
330104-06-14-50-02-00 |
330104-10-18-10-01-00 |
|
330103-00-05-20-02-CN |
330103-00-04-10-12-00 |
330104-00-06-10-02-CN |
|
330851-02-000-030-10-00-05 |
330105-02-12-90-02-05 |
330104-00-07-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
