M10 × 1 reverse mount
Item NO.:
330907-05-30-10-02-00Order(MOQ):
1Goods Stock:
17Payment:
T/TLead Time：
In stockWeight:
0.3KGDimension:
113x8x2cmDescription:
PROXIMITY PROBESPrice:
Ask3300 XL NSv selection guide for maintenance and procurement.
TRACE THE LOOP · CONFIRM THE CODE
330907-05-30-10-02-00 is configured as the following component: M10 × 1 reverse-mount proximity probe. Reverse-mount NSv probe for applications that require compact rear-side installation geometry and a matched NSv signal chain.
M10 × 1 reverse mount
Fixed probe geometry
1.0 m lead
Standard cable
Approval not required
Identify the installed sensing or input context before disconnecting hardware.
This exact configured component must match the family, geometry, length and connection requirements.
Verify the receiving device, scale and commissioning response after installation.
| Product and technical data | |
|---|---|
| Manufacturer | Bently Nevada |
| Exact model | 330907-05-30-10-02-00 |
| Product type | 3300 NSv Reverse-Mount Probe |
| Mounting | Reverse mount, M10 × 1 |
| Probe geometry | Ordering option 05-30 |
| Total lead length | 1.0 m |
| Cable option | Standard ClickLoc |
| Armor / FluidLoc | Not available |
| Connector protector | Not available |
| Probe tip | PPS |
| Probe case | AISI 304 stainless steel |
| Recommended case torque | 7.5 N·m |
| Maximum case torque | 22.6 N·m |
| Minimum bend radius | 25.4 mm |
| Connector torque | 0.56 N·m maximum |
| Probe temperature | -52 to +177°C |
| Approval option | 00 - Not required |
| Official datasheet | 3300 XL NSv Datasheet 147385 Rev. R |
| ApterPLC transaction information | |
| Payment | T/T |
| Goods Stock | 17 |
| Weight | 0.3KG |
| Dimension | 113x8x2cm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Capture every code segment and the manufacturer nameplate; do not shorten the final 00 or 05 option.
Record connected probe, extension cable, Proximitor or transmitter and monitor/control input.
Confirm thread, case and unthreaded lengths, bend radius, routing clearance and mounting access.
Compare the project classification with the certificate set offered for the exact unit.
Photograph labels, connectors, mounting, cable route, probe position and the channel baseline.
Preserve the matched family, total electrical length, connector protection, grounding and mounting geometry.
Verify supply or loop current, probe gap or axial position, output scale and channel response under the plant procedure.
Compare the complete nameplate, 3300 XL NSv family, the listed geometry or length, connector option, associated components and approval requirement.
No. Similar-looking parts can use different system lengths, mounting geometry, cable protection or approval options. The full order code controls selection.
Send the full label, both connector ends, installed mount or probe position, related probe/cable/Proximitor labels and the receiving channel.
Check the matched family and total electrical length, connector cleanliness and tightness, cable routing, probe gap or axial position, wiring and receiving-channel scale.
No. This page describes one configured component. Confirm the probe, extension cable, Proximitor or transmitter, monitor input and any mounting accessories separately.
Provide the exact model, complete-label photo, quantity, delivery country, required date and the related signal-chain labels. This reduces visually similar substitutions.
Complete labels and connected components are compared before quotation.
Commercial terms and available traceability are confirmed with the offer.
Availability and delivery options are coordinated around the project schedule.
Coverage begins on the shipment date unless the confirmed quotation states otherwise. Coverage scope and remedy follow the confirmed quotation and sales agreement.
Retain the nameplate, order reference, connector and terminal photos, related signal-chain labels and a clear description of the reported symptom.
Baker Hughes 3300 XL NSv Datasheet 147385 Rev. R is the public family document used to decode this exact configuration. Review the complete order code, installation context and approval package together before replacement.
Configured version: Fixed reverse-mount M10 × 1 geometry · 1.0 m lead · standard ClickLoc cable · agency approval option 00 — not required
Open Official DatasheetAsk a Product QuestionRelated Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
