Hold the five-metre chain
Match the probe lead and extension cable to the five-metre sensor rather than selecting by connector appearance.
Bently Nevada 330878-50-00 is a panel-mount 3300 XL 50 mm Proximitor Sensor for a documented 5.0 m differential-expansion transducer system.
Item NO.:
330878-50-00Order(MOQ):
1Goods Stock:
32Payment:
T/TLead Time：
In stockWeight:
0.22KGDimension:
8x6.1x6.4cmDescription:
PROXIMITOR SENSORPrice:
AskSend the complete nameplate, installed-system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Exact-model decision context
Long-range differential-expansion work depends on the complete transducer chain, not the conditioner alone. 330878-50-00 is the panel-mount Proximitor Sensor for the documented five-metre 3300 XL 50 mm system.
The matched probe, extension cable and sensor establish the published scale factor and linear range. During replacement, keep the existing total electrical length, target arrangement and mounting method under review before applying power.
Panel mounting also makes cabinet preparation part of the job. Confirm the mounting footprint, isolation hardware, field wiring and available service clearance, then record all component labels for commissioning and future maintenance.
Checks that move the order forward
Match the probe lead and extension cable to the five-metre sensor rather than selecting by connector appearance.
Confirm cabinet space, mounting hardware, isolation and access for wiring checks before the outage.
Verify target geometry and probe gap before treating an output change as a monitor calibration problem.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 50 mm proximity transducer system |
| Component | Proximitor Sensor |
| System length | 50 - 5.0 m (16.4 ft) |
| Mounting | Panel mount |
| Approval selection | 00 - no agency approval option requested |
| Nominal scale factor | 0.394 V/mm (10 mV/mil) under documented system conditions |
| Linear range | 27.9 mm (1100 mils) under documented system conditions |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Two model-relevant engineering themes
Use only the supported 50 mm probe and extension-cable combination whose total electrical length matches the five-metre sensor.
Provide the documented panel mounting, electrical isolation, field wiring and target arrangement before setting the operating gap.
Stop and release boundary
Do not use the sensor to compensate for an incorrect probe, cable length or target geometry. Stop commissioning when the component labels or five-metre chain cannot be reconciled with the official system instructions.
Supported task and system role
Within a complete 3300 XL 50 mm system, the sensor supports long-range differential-expansion measurement on large rotating machinery where the documented target and mechanical arrangement are provided.
Buyer, installer and engineer situations
It can be considered when the installed probe and extension cable are the supported 50 mm components and their total electrical length is five metres. Compare all three labels and the target arrangement before replacement.
Confirm the mounting footprint, isolation hardware, cabinet clearance, power and signal wiring. Keep enough access to inspect terminals and record the final wiring.
A changed probe gap, disturbed target alignment, wrong total cable length, damaged connector or wiring fault can change the output. Correct those causes before adjusting monitor scaling or alarms.
No. Option 00 does not request an agency approval; site classification and installation acceptance must be checked separately against applicable official records.
Read the complete labels and confirm that the parts belong to the supported 3300 XL 50 mm family and make the five-metre total. Similar connectors do not prove a matched chain.
Send the sensor, probe and extension-cable labels, target and mounting drawings, required system length, quantity, destination and clear cabinet photographs.
ApterPLC supply capability
New original supply: Quality-focused sourcing and exact-model review support confident purchase decisions.
Current, discontinued and scarce products: Our supply network covers routine needs and difficult-to-source automation parts.
Responsive after-sales service: We support delivery coordination, receipt questions and post-purchase technical communication.
Search variants for discovery only
Search note: Common spelling, spacing, separator and character-confusion variants are listed for discovery only. Use the exact Product Model above for quotation and ordering.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Aptersells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
The official manufacturer publication was reduced only by removing pages unrelated to this exact model. The cover, identity, scope, necessary preceding context and useful model pages remain complete and in their original order.
Source: Bently Nevada 174014
Retained official pages: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 24, 25
|
330180-12-00 |
3500/33 |
3500/50 |
|
330180-50-00 |
3500/42E |
3500/60 |
|
330180-50-05 |
3500/23E |
3500/50E |
|
330180-51-00 |
3500/40M |
3500/46M |
|
330180-51-05 |
3500/70M |
3500/64M |
|
330130-085-01-00 |
3500/33 149986-01 |
3500/60 163179-01 |
|
330130-085-03-05 |
3500/25 149369-01 |
3500/61 136711-02 |
|
330171-00-08-10-02-00 |
3500/32 125712-01 |
3500/62 163179-03 |
|
330171-08-24-10-02-00 |
3500/40M 140734-01 |
3500/65 145988-02 |
|
330172-16-42-10-01-00 |
3500/40M 140734-01 |
3500/53 133388-01 |
|
330173-00-05-10-12-00 |
3500/40M 176449-01 |
3500/50 133388-02 |
|
330173-00-06-10-02-00 |
3500/42M 140734-02 |
3500/64M 176449-05 |
|
330173-00-18-10-02-05 |
3500/42M 140734-02 |
3500/53M 286566-01 |
|
330173-07-11-10-02-00 |
3500/42M 176449-02 |
3500/50M 286566-02 |
|
330173-08-18-10-02-00 |
3500/32M 149986-02 |
3500/61E 285694-02 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
