Large-range family
Keep the probe within the 3300 XL 50 mm system.
Item NO.:
330876-02-50-00-00Order(MOQ):
1Goods Stock:
5Payment:
T/TLead Time：
In stockWeight:
0.3KGDimension:
24.3x8x15.5cmDescription:
PROBEPrice:
AskA straight-exit M14 × 1.5 probe with a 5.0 m high-temperature FluidLoc lead for the 3300 XL 50 mm system.
330876-02-50-00-00 is a probe for the Bently Nevada 3300 XL 50 mm proximity transducer system. Option 02 identifies the straight-exit M14 × 1.5 case.
The 50 field specifies a 5.0 m total cable length. Option 00 is high-temperature FluidLoc cable without armor, and the final 00 is the no-approval-required selection.
The five-metre probe is used with the five-metre Proximitor Sensor. Do not infer compatibility from connector fit or substitute another system length.
Keep the probe within the 3300 XL 50 mm system.
Verify high-temperature FluidLoc routing and mechanical protection.
Use the five-metre probe with the matching five-metre Proximitor Sensor.
| Manufacturer | Bently Nevada |
|---|---|
| Component | Proximity probe |
| Product family | 3300 XL 50 mm proximity transducer system |
| Case / exit option | 02 — straight-exit M14 × 1.5 case |
| Total cable length | 5.0 m |
| Cable option | 00 — high-temperature FluidLoc cable; no armor |
| Approval option | 00 — not required |
| System selection rule | Five-metre probe must be used with the five-metre Proximitor Sensor |
| Application context | Large-range position and differential-expansion measurements |
| Selection boundary | Do not mix with 8 mm, 11 mm or other transducer families |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Keep the 50 mm system family, M14 × 1.5 case, 5.0 m FluidLoc cable and matching five-metre sensor together. Record the mounting position, cable route and all connected component labels instead of selecting by appearance.
Provide the complete nameplate, full product view, mounting point, both connector ends and the labels of the connected cable, sensor or monitor module.
Not on connector fit alone. Linear range, system length, temperature class and approval option must be checked against the complete order code.
Check channel power or configuration, connector locking, cable bends and shielding, then confirm that the probe, cable and sensor belong to one matched system.
Compare the carton and product labels, complete suffix, connector and cable condition, and supplied approval or inspection documents with the purchase order.
Send the complete model, quantity, required delivery date, destination, installation photos and connected component models, plus any available drawing or equipment list.
Share the exact nameplate, mounting dimensions, cable route, connected component labels and approval documents. ApterPLC can then prepare a model-focused quotation without treating connector fit or a family name as proof of interchangeability.
ApterPLC provides a one-year warranty on this item, giving buyers a clear support path after delivery.
Apter sells industrial automation parts through independent channels and is not an authorized distributor, dealer or representative of the brands shown. Product names, images and trademarks are used for identification only.
The English manufacturer document below is hosted by ApterPLC for product selection and technical review.
3300 XL 50 mm Proximity Transducer System Datasheet · 174014 Rev. LOpen the English manufacturer datasheet for probe ordering information, system specifications and dimensions.Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
