Selection
- Confirm the machine requires the 11 mm system range and a 5 m DIN-mount sensor.
- Match the probe, extension cable and target material to the 330780 system.
Item NO.:
330780-51-00Order(MOQ):
1Goods Stock:
19Payment:
T/TLead Time：
In stockWeight:
0.08KGDimension:
21.5x23x3.5cmDescription:
PROX CONTROLPrice:
AskA 5.0 m DIN-mount Proximitor Sensor for the 3300 XL 11 mm system used in position and differential-expansion applications.
The wider linear range of the 3300 XL 11 mm system is used when an 8 mm chain does not provide enough measurement travel. In that arrangement, 330780-51-00 is the DIN-mount Proximitor Sensor that conditions the probe signal for a 5.0 m system.
Cable length is part of the calibration, not just a routing choice. The 11 mm probe lead and extension cable connected to 330780-51-00 must add up to the specified 5.0 m total, otherwise the expected scale factor and range no longer describe the installed chain.
With the correct probe, cable and monitor configuration, 330780-51-00 can support axial position, ramp differential expansion, rod position or drop, tachometer and Keyphasor duties. The final application should be based on the complete system design rather than the sensor housing alone.
It belongs to the 11 mm system used for larger-range tasks such as axial position and ramp differential expansion. Confirm that the machine target and monitor configuration are designed for the 11 mm scale and range.
Add the probe lead and extension-cable lengths and compare the result with the required 5.0 m system length. Select the correct cable combination rather than compensating with monitor scaling.
Measure the sensor supply and static PROX OUT relative to common, then check field-cable continuity. Missing power or an open probe path can produce the same symptom as a failed Proximitor Sensor.
Install the DIN-mount sensor in a suitable enclosure with stable grounding and separation from high-noise power wiring. Keep the probe cable path intact and accessible for maintenance.
Review cable routing, grounding, target condition, channel bandwidth and machine state. Static bias confirms one part of the chain but does not validate the dynamic signal path.
No. It is the 5 m DIN-mount Proximitor Sensor for the 3300 XL 11 mm system and should be paired with the documented 11 mm probe and extension cable.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete nameplate, original packaging and transaction record so the exact unit and revision can be identified during support.
Support: sales1@apterpower.com · +8618020776782
Use this document to check the 3300 XL 11 mm Proximitor Sensor mounting option, 5 m system configuration, electrical specifications, matching requirements and dimensional drawings.
Download the 330780-51-00 filtered official datasheet|
3300/53 |
4454-156 |
1701/15 |
|
3300/21 |
16137-174 |
136294-01 |
|
990-04-XX-01-CN |
16137-177 |
330180-52-05 |
|
330354-040-24-05 |
330980-70-05 |
330104-00-06-10-02-00 |
|
330930-045-00-00 |
330180-92-05 |
330104-00-06-10-11-00 |
|
330130-070-00-CN |
177230-01-01-CN |
330104-00-07-05-02-00 |
|
3500/93 135799-02 |
330930-060-00-05 |
330103-11-19-10-02-00 |
|
3500/93 135785-02 |
3500/62 133811-03 |
330104-00-07-90-02-00 |
|
330103-05-15-05-02-00 |
3500/70M 140734-09 |
330104-00-08-05-02-00 |
|
330104-00-15-10-02-00 |
330905-08-13-10-02-05 |
330104-05-13-10-02-00 |
|
330106-05-30-50-02-00 |
330104-01-08-10-01-05 |
330104-05-15-05-02-00 |
|
330907-05-30-05-02-05 |
330101-00-20-05-02-05 |
330104-06-12-10-02-00 |
|
330106-05-30-20-02-CN |
330104-06-14-50-02-00 |
330104-10-18-10-01-00 |
|
330103-00-05-20-02-CN |
330103-00-04-10-12-00 |
330104-00-06-10-02-CN |
|
330851-02-000-030-10-00-05 |
330105-02-12-90-02-05 |
330104-00-07-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
