Selection
- Confirm that reverse mounting and the fixed 02/18 probe geometry fit the bracket and target.
- Verify the 9.0 m lead, connector option and matching 3300 XL 11 mm system components.
Item NO.:
330705-02-18-90-02-00Order(MOQ):
1Goods Stock:
27Payment:
T/TLead Time：
In stockWeight:
0.1KGDimension:
20.4x22.2x3.7cmDescription:
PROXIMITY PROBESPrice:
Ask330705-02-18-90-02-00 is a 3300 XL 11 mm reverse-mount probe with fixed 02/18 geometry and a 9.0 m lead.
330705-02-18-90-02-00 is a Bently Nevada 3300 XL 11 mm reverse-mount proximity probe with a 3/8-24 UNF thread. The 330705-02-18-90-02-00 ordering string retains the fixed 02/18 reverse-mount geometry.
330705-02-18-90-02-00 uses total-length code 90 for a 9.0 m lead and connector code 02 for a miniature ClickLoc coaxial connector with standard cable. It belongs to the 3300 XL 11 mm measurement system.
330705-02-18-90-02-00 uses agency option 00, meaning that no agency-approval option is required in the ordering table. Confirm reverse-mount access, target reach, matching 11 mm system components and final site requirements.
Its reverse-mount format is useful when the front side is obstructed but the bracket provides rear access for the 3/8-24 UNF body. The fixed 02/18 geometry and target reach should be confirmed before the outage work is released.
Allow room for the body, locknut and cable route behind the bracket, and provide support so the 9.0 m lead does not load the probe. A dry, accessible ClickLoc joint also improves future serviceability.
Review reverse-mount security, probe alignment and target gap before changing monitor settings, then inspect the connector and lead for disturbance. Casing work can alter bracket position or cable strain even when the electronics are unchanged.
We advise against mixing the measurement families. This is a 3300 XL 11 mm probe, so the extension and Proximitor Sensor arrangement should be the documented 11 mm system rather than an 8 mm interface selected by connector appearance.
Protect the lead from pulling and sharp bends, cap or cover the disconnected ClickLoc endpoint and label the original route. Recording the pre-work gap and baseline gives the commissioning team a useful comparison after reassembly.
Option 00 does not add an agency-approval selection, so the part number alone is not sufficient for that requirement. Review the physical label and the complete installed-system documentation against the site specification.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete product label, original packaging and transaction record so the exact unit can be identified quickly if support is required.
This reviewed 7-page PDF contains selected official manufacturer pages covering the exact product family, ordering codes and relevant configuration facts.
Open 330705-02-18-90-02-00 Datasheet|
3300/53 |
330101-00-19-10-02-00 |
330102-00-13-10-02-00 |
|
3300/55 |
330101-00-28-05-02-00 |
330102-00-40-10-02-00 |
|
3300XL 8MM |
330101-00-30-10-02-05 |
330102-00-80-10-02-00 |
|
330100-50-00 |
330101-00-40-10-02-00 |
330102-22-58-10-02-00 |
|
330100-50-02 |
330101-00-50-10-02-00 |
330103-00-02-05-01-00 |
|
330100-50-05 |
330101-00-56-10-02-00 |
330103-00-03-05-02-00 |
|
330101-00-08-05-02-00 |
330101-00-60-10-02-00 |
330103-00-03-10-01-05 |
|
330101-00-08-05-02-05 |
330101-00-63-10-02-00 |
330103-00-03-10-02-00 |
|
330101-00-08-10-02-00 |
330101-02-78-05-02-00 |
330103-00-03-10-02-05 |
|
330101-00-08-20-02-05 |
330101-10-27-05-02-05 |
330103-00-03-50-02-00 |
|
330101-00-12-10-02-05 |
330101-20-36-10-02-00 |
330103-00-04-05-02-00 |
|
330101-00-15-10-02-00 |
330101-23-38-10-02-00 |
330103-00-04-05-02-05 |
|
330101-00-16-10-02-00 |
330101-24-35-10-02-00 |
330101-XX-XX-10-02-05 |
|
330101-00-18-10-02-05 |
330101-30-63-10-02-00 |
330101-30-63-15-02-CN |
|
330101-00-12-10-01-CN |
330101-30-63-10-02-CN |
330101-XX-XX-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
