Validate the M14 reach
Check zero unthreaded length, 40 mm case and permitted thread engagement.
Item NO.:
330703-000-040-10-11-00Order(MOQ):
1Goods Stock:
27Payment:
T/TLead Time：
In stockWeight:
0.16KGDimension:
20.4x22.2x3.7cmDescription:
PROXIMITY PROBESPrice:
AskSend the complete nameplate, installed system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
Exact-model engineering context
Fluid migration at the probe lead can drive the cable decision before the monitor is selected. 330703-000-040-10-11-00 combines the compact M14 x 1.5 geometry with a one-metre FluidLoc cable and factory-specified connector-protector option.
Its zero unthreaded length and 40 mm case must still fit the turbine or compressor drawing. FluidLoc and the protector reduce specific environmental risks, but they do not replace correct routing, total system length, connector seating or local temperature checks.
Practical release checks
Check zero unthreaded length, 40 mm case and permitted thread engagement.
Keep bends, clamps and local temperatures within the documented limits.
The one-metre probe still needs the supported extension cable and Proximitor Sensor pairing.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 11 mm proximity transducer system |
| Product type | Metric proximity probe without armor |
| Probe thread | M14 x 1.5 |
| Unthreaded length | 000 - 0 mm |
| Overall case length | 040 - 40 mm |
| Total probe length | 10 - 1.0 m (3.3 ft) |
| Connector / cable option | 11 - miniature ClickLoc connector with connector protector, FluidLoc cable |
| Agency approval selection | 00 - not required |
| System scale factor / range | 3.94 V/mm (100 mV/mil); 4.0 mm (160 mil) linear range under documented conditions |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Two model-relevant technical themes
FluidLoc helps prevent oil or other liquids from migrating through the cable interior, while each component retains its own temperature and installation limits.
Check M14 thread engagement, target clearance, connector seating, protector installation and the extension cable needed to complete the selected system length.
Stop / release boundary
A protected FluidLoc joint is not permission to ignore routing or temperature. Release the probe only when geometry, cable route, complete system length and target setup are all documented.
Officially supported task family
Suited to supported longer-range 11 mm displacement or vibration measurements where the M14 geometry and FluidLoc/protector cable option address the documented installation needs.
Buyer, installer and engineer situations
It is intended to help prevent oil or other liquids from migrating through the cable interior. The site must still protect the route, connector and cable from heat and mechanical damage.
Option 11 combines FluidLoc cable with a connector protector, while option 02 uses standard cable without the factory-installed protector. The probe geometry and system-length checks remain separate.
No. Confirm thread engagement, zero unthreaded length, 40 mm case reach, target clearance and bracket or casing geometry from the machine drawing.
Choose the supported extension cable that makes the complete chain equal the selected five- or nine-metre Proximitor Sensor length. Do not add cable by splicing.
Inspect target condition, probe gap, total chain length, ClickLoc seating, protector installation, cable damage, power and field wiring before changing monitor configuration.
Provide all transducer labels, mounting drawing, target material, fluid and temperature exposure, required system length, quantity, destination and clear route photographs.
ApterPLC supply capability
New original supply: Exact-model review supports quality-focused sourcing and incoming identity checks.
Current and discontinued products: Our network supports routine, scarce and hard-to-find automation parts.
Responsive after-sales service: We assist with delivery coordination, receipt questions and post-purchase technical communication.
Search and buyer terminology
Search note: Common spelling and separator variants are listed for discovery only. Use the exact product model shown above for quotation and ordering.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
3300/53 |
330101-00-19-10-02-00 |
330102-00-13-10-02-00 |
|
3300/55 |
330101-00-28-05-02-00 |
330102-00-40-10-02-00 |
|
3300XL 8MM |
330101-00-30-10-02-05 |
330102-00-80-10-02-00 |
|
330100-50-00 |
330101-00-40-10-02-00 |
330102-22-58-10-02-00 |
|
330100-50-02 |
330101-00-50-10-02-00 |
330103-00-02-05-01-00 |
|
330100-50-05 |
330101-00-56-10-02-00 |
330103-00-03-05-02-00 |
|
330101-00-08-05-02-00 |
330101-00-60-10-02-00 |
330103-00-03-10-01-05 |
|
330101-00-08-05-02-05 |
330101-00-63-10-02-00 |
330103-00-03-10-02-00 |
|
330101-00-08-10-02-00 |
330101-02-78-05-02-00 |
330103-00-03-10-02-05 |
|
330101-00-08-20-02-05 |
330101-10-27-05-02-05 |
330103-00-03-50-02-00 |
|
330101-00-12-10-02-05 |
330101-20-36-10-02-00 |
330103-00-04-05-02-00 |
|
330101-00-15-10-02-00 |
330101-23-38-10-02-00 |
330103-00-04-05-02-05 |
|
330101-00-16-10-02-00 |
330101-24-35-10-02-00 |
330101-XX-XX-10-02-05 |
|
330101-00-18-10-02-05 |
330101-30-63-10-02-00 |
330101-30-63-15-02-CN |
|
330101-00-12-10-01-CN |
330101-30-63-10-02-CN |
330101-XX-XX-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
