Check the geometry
Confirm zero unthreaded length, 40 mm case length and no more than the documented M14 thread engagement.
Item NO.:
330703-000-040-10-02-00Order(MOQ):
1Goods Stock:
27Payment:
T/TLead Time：
In stockWeight:
0.08KGDimension:
116x2.5x2cmDescription:
PROXIMITY PROBESPrice:
AskSend the complete nameplate, installed system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
Exact-model engineering context
Where an 11 mm measurement needs compact metric case geometry, 330703-000-040-10-02-00 provides an M14 x 1.5 probe with zero unthreaded length and a 40 mm overall case.
The one-metre lead uses the 02 miniature ClickLoc connector and standard cable without a factory-installed connector protector. Confirm thread engagement, case reach, target clearance, total system length and connector-protection plan before the probe is ordered or installed.
Practical release checks
Confirm zero unthreaded length, 40 mm case length and no more than the documented M14 thread engagement.
Add the supported extension-cable length required by the selected five- or nine-metre Proximitor Sensor.
Option 02 is the standard cable and ClickLoc connector without a factory-installed protector.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 11 mm proximity transducer system |
| Product type | Metric proximity probe without armor |
| Probe thread | M14 x 1.5 |
| Unthreaded length | 000 - 0 mm |
| Overall case length | 040 - 40 mm |
| Total probe length | 10 - 1.0 m (3.3 ft) |
| Connector / cable option | 02 - miniature coaxial ClickLoc connector, standard cable |
| Agency approval selection | 00 - not required |
| System scale factor / range | 3.94 V/mm (100 mV/mil); 4.0 mm (160 mil) linear range under documented conditions |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Two model-relevant technical themes
Confirm mounting-thread engagement, case reach, tip clearance, target geometry and the extension cable needed by the selected system length.
Apply the separate probe, cable, connector and Proximitor Sensor limits; protect the unprotected 02 connector joint from contamination and mechanical load.
Stop / release boundary
Do not force a 40 mm case into a drawing intended for different unthreaded length or thread engagement. Mechanical reach must be checked before electrical commissioning.
Officially supported task family
The 3300 XL 11 mm family supports longer-range vibration and displacement work such as axial position, differential expansion, rod position or drop, tachometer, zero-speed and Keyphasor measurements when the full system is suitable.
Buyer, installer and engineer situations
Confirm the M14 x 1.5 port, zero unthreaded length, 40 mm case reach, target clearance and a maximum thread engagement consistent with the official M14 guidance.
No. Select the supported extension cable and Proximitor Sensor so the complete chain equals the required five or nine metres.
Option 02 specifies the miniature ClickLoc connector and standard cable without a factory-installed protector. Plan the official protector or other documented protection for the installed joint.
Use the 11 mm system instructions, target material and monitor setup; the official system specifications are referenced to a 2.5 mm probe gap. Confirm the actual application before final adjustment.
The 11 mm family supports longer-range position and vibration tasks, but the mounting drawing, target, system length and monitor configuration must establish suitability for the specific machine.
Send the full probe, extension-cable and Proximitor labels, mounting drawing, target material, required system length, connector-protection plan, quantity and destination.
ApterPLC supply capability
New original supply: Exact-model review supports quality-focused sourcing and incoming identity checks.
Current and discontinued products: Our network supports routine, scarce and hard-to-find automation parts.
Responsive after-sales service: We assist with delivery coordination, receipt questions and post-purchase technical communication.
Search and buyer terminology
Search note: Common spelling and separator variants are listed for discovery only. Use the exact product model shown above for quotation and ordering.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
3300/53 |
330101-00-19-10-02-00 |
330102-00-13-10-02-00 |
|
3300/55 |
330101-00-28-05-02-00 |
330102-00-40-10-02-00 |
|
3300XL 8MM |
330101-00-30-10-02-05 |
330102-00-80-10-02-00 |
|
330100-50-00 |
330101-00-40-10-02-00 |
330102-22-58-10-02-00 |
|
330100-50-02 |
330101-00-50-10-02-00 |
330103-00-02-05-01-00 |
|
330100-50-05 |
330101-00-56-10-02-00 |
330103-00-03-05-02-00 |
|
330101-00-08-05-02-00 |
330101-00-60-10-02-00 |
330103-00-03-10-01-05 |
|
330101-00-08-05-02-05 |
330101-00-63-10-02-00 |
330103-00-03-10-02-00 |
|
330101-00-08-10-02-00 |
330101-02-78-05-02-00 |
330103-00-03-10-02-05 |
|
330101-00-08-20-02-05 |
330101-10-27-05-02-05 |
330103-00-03-50-02-00 |
|
330101-00-12-10-02-05 |
330101-20-36-10-02-00 |
330103-00-04-05-02-00 |
|
330101-00-15-10-02-00 |
330101-23-38-10-02-00 |
330103-00-04-05-02-05 |
|
330101-00-16-10-02-00 |
330101-24-35-10-02-00 |
330101-XX-XX-10-02-05 |
|
330101-00-18-10-02-05 |
330101-30-63-10-02-00 |
330101-30-63-15-02-CN |
|
330101-00-12-10-01-CN |
330101-30-63-10-02-CN |
330101-XX-XX-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
