Verify M8 x 1
Check the installed stud or threaded hole and available connector clearance.
Item NO.:
330500-02-00Order(MOQ):
1Goods Stock:
30Payment:
T/TLead Time：
In stockWeight:
0.14KGDimension:
2.5x2.5x7.3cmDescription:
VELOMETERPrice:
AskSend the complete nameplate, installed system context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
Exact-model engineering context
Metric mounting is the first acceptance question for 330500-02-00. The 02 adapter selection specifies M8 x 1, while the 00 approval code indicates that an agency approval option was not requested.
The solid-state Velomitor measures absolute vibration at a bearing housing, machine casing or structure. A rigid mounting surface, correct adapter engagement, suitable monitor input and controlled cable route are necessary before the published sensitivity and frequency response can be useful in practice.
Practical release checks
Check the installed stud or threaded hole and available connector clearance.
Use a rigid, clean mounting point and the documented torque range.
Confirm monitor input, cable, grounding and expected vibration bandwidth.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 330500 Velomitor Piezo-velocity Sensor |
| Product type | Absolute vibration velocity sensor |
| Mounting thread adapter | 02 - M8 x 1 |
| Agency approval selection | 00 - not required |
| Nominal sensitivity | 3.94 mV/mm/s (100 mV/in/s) ±5% |
| Frequency response | 4.5 Hz to 5 kHz ±3.0 dB; 6.0 Hz to 2.5 kHz ±0.9 dB |
| Velocity range | 1270 mm/s (50 in/s) peak |
| Operating temperature | -55°C to +121°C (-67°F to +250°F) |
| Case / connector | 316L stainless steel case and two-pin MIL-C-5015 hermetically sealed connector |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Two model-relevant technical themes
Confirm the M8 x 1 interface, mounting-surface flatness, torque, connector clearance and monitor input before starting the machine.
The mounting path must transmit meaningful machine vibration; loose or flexible mounting can reduce amplitude or create false signals.
Stop / release boundary
Do not solve an incompatible mounting point with an unverified adapter stack. Confirm the machine thread and official adapter selection before installation.
Officially supported task family
Suitable for absolute bearing-housing, casing and structural vibration measurement where the M8 x 1 adapter and the documented electrical interface fit the machine and monitor.
Buyer, installer and engineer situations
It is supplied with the documented M8 x 1 adapter, but the stud or hole depth, mounting face, thread condition and connector clearance must still be checked before installation.
Inspect mounting tightness, surface rigidity, adapter engagement, cable and monitor input first. A poor mechanical path can attenuate the casing motion reaching the sensor.
The official family data permits up to 305 m of the specified cable without stated signal degradation; the installation should still review routing, grounding and required bandwidth.
No. It means an agency approval option was not requested. The site must not infer hazardous-area suitability from the family name or connector.
Stop if the mounting thread, surface, connector, cable or monitor input cannot be matched to the official instructions, or if the local temperature exceeds a component limit.
Provide the full label, M8 mounting details, monitor channel, cable length, expected temperature, quantity, destination and clear connector and base photographs.
ApterPLC supply capability
New original supply: Exact-model review supports quality-focused sourcing and incoming identity checks.
Current and discontinued products: Our network supports routine, scarce and hard-to-find automation parts.
Responsive after-sales service: We assist with delivery coordination, receipt questions and post-purchase technical communication.
Search and buyer terminology
Search note: Common spelling and separator variants are listed for discovery only. Use the exact product model shown above for quotation and ordering.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
3300/53 |
330101-00-19-10-02-00 |
330102-00-13-10-02-00 |
|
3300/55 |
330101-00-28-05-02-00 |
330102-00-40-10-02-00 |
|
3300XL 8MM |
330101-00-30-10-02-05 |
330102-00-80-10-02-00 |
|
330100-50-00 |
330101-00-40-10-02-00 |
330102-22-58-10-02-00 |
|
330100-50-02 |
330101-00-50-10-02-00 |
330103-00-02-05-01-00 |
|
330100-50-05 |
330101-00-56-10-02-00 |
330103-00-03-05-02-00 |
|
330101-00-08-05-02-00 |
330101-00-60-10-02-00 |
330103-00-03-10-01-05 |
|
330101-00-08-05-02-05 |
330101-00-63-10-02-00 |
330103-00-03-10-02-00 |
|
330101-00-08-10-02-00 |
330101-02-78-05-02-00 |
330103-00-03-10-02-05 |
|
330101-00-08-20-02-05 |
330101-10-27-05-02-05 |
330103-00-03-50-02-00 |
|
330101-00-12-10-02-05 |
330101-20-36-10-02-00 |
330103-00-04-05-02-00 |
|
330101-00-15-10-02-00 |
330101-23-38-10-02-00 |
330103-00-04-05-02-05 |
|
330101-00-16-10-02-00 |
330101-24-35-10-02-00 |
330101-XX-XX-10-02-05 |
|
330101-00-18-10-02-05 |
330101-30-63-10-02-00 |
330101-30-63-15-02-CN |
|
330101-00-12-10-01-CN |
330101-30-63-10-02-CN |
330101-XX-XX-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
