Machine casing
The integral stud couples the accelerometer to the bearing housing or machine case.
Item NO.:
330400-01-00Order(MOQ):
1Goods Stock:
16Payment:
T/TLead Time：
In stockWeight:
0.32KGDimension:
2x18.7x12.8cmDescription:
CABLEPrice:
Ask
Bently Nevada 330400-01-00 is an acceleration transducer for casing-vibration measurement on critical machinery. Its 100 mV/g sensitivity, 50 g peak range and response to 15 kHz support higher-frequency work such as gear-mesh monitoring as well as general machine-condition analysis.
The 01 option identifies a 1/4-28 UNF integral mounting stud, while 00 is the version without optional agency approvals. The stainless-steel, hermetically sealed construction supports demanding industrial environments when the mounting point and receiving channel are prepared for the published sensor characteristics.
The integral stud couples the accelerometer to the bearing housing or machine case.
The sensor converts casing acceleration into a standard powered-transducer output.
A compatible channel uses the signal for protection, trending or high-frequency diagnostics.
Response to 15 kHz supports casing measurements where gear and bearing information matters.
A 100 mV/g output gives buyers a clear channel-scaling reference.
The integral UNF stud helps distinguish this version from the M8 × 1 configuration.
| Sensitivity | 100 mV/g (10.2 mV/m/s²), ±5% |
|---|---|
| Acceleration range | 50 g peak |
| Frequency response | 10 Hz to 15 kHz, ±3 dB |
| Mounting thread | 1/4-28 UNF integral stud |
| Connector | 3-pin MIL-C-5015 receptacle |
| Typical sensor weight | 99 g without cable |
| Typical sensor size | 23 mm diameter × 59 mm height |
| Operating temperature | -55°C to +121°C |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Used for casing acceleration measurement on turbines, compressors, gearboxes, motors and other critical rotating equipment where higher-frequency vibration information can improve fault detection and maintenance decisions.
Yes. The 01 option uses an integral 1/4-28 UNF stud, so the prepared surface and thread should be suitable for that mounting interface.
Yes. Its response extends to 15 kHz, supporting gear-mesh and other higher-frequency casing-acceleration work within the receiving channel's bandwidth.
No. The -01 version uses a 1/4-28 UNF stud, while the -02 version uses M8 × 1. The mounting interface must match the machine.
It uses a three-pin MIL-C-5015 receptacle. The mating cable, sensor power and receiving-channel scaling should all be compared before reuse.
Its stainless-steel, hermetically sealed construction is intended for industrial machinery service, within the published temperature and environmental limits.
Send the complete label, mounting-point and cable photos, monitor or analyzer model, approval requirement, quantity and delivery country.
Complete order codes and application details support a clear, accurate quotation.
Commercial terms and available traceability are confirmed with the offer.
Stock position and shipping options are coordinated around your maintenance schedule.
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
This manufacturer document provides the ordering details and technical context used to identify the correct 100 mV/g Accelerometer configuration.
Open 330400-01-00 DatasheetAsk a Product Question|
330980-50-00 |
330780-50-00 |
330705-02-18-10-02-00 |
|
330980-50-05 |
330780-90-00 |
330705-02-18-90-02-00 |
|
330980-51-05 |
330780-91-00 |
330703-000-040-10-02-00 |
|
330980-71-CN |
330850-50-00 |
330703-000-040-10-11-00 |
|
330930-045-00-05 |
330850-50-05 |
330703-000-050-10-02-05 |
|
330930-045-01-00 |
330850-90-05 |
330703-000-060-10-02-00 |
|
330930-060-00-00 |
330730-040-03-00 |
330703-000-060-10-02-00 |
|
330930-040-01-00 |
330730-080-00-00 |
330703-000-060-50-12-00 |
|
330930-065-00-05 |
330730-080-01-00 |
330703-000-070-10-02-00 |
|
330930-065-01-05 |
330730-080-12-00 |
330703-050-120-10-02-00 |
|
330930-065-01-05 |
330730-040-00-00 |
330704-000-050-10-02-00 |
|
330930-065-03-05 |
330730-040-00-00 |
330709-000-040-50-02-00 |
|
330930-060-01-CN |
330730-040-00-05 |
330709-000-070-10-02-00 |
|
33104-00-10-10-02-05 |
330730-080-12-CN |
330709-000-070-10-02-00 |
|
3500/05-01-01-00-00-00 |
330851-02-000-030-10-00-05 |
330703-000-060-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
