Selection
- Confirm that a 5 mm tip is required by the available side clearance or target geometry.
- Match the probe, extension cable and Proximitor Sensor for the intended total system length.
A compact 1/4-28 UNF 5 mm probe with a 1.0 in case and 1.0 m lead for tight shaft-vibration and position measurement locations.
Item NO.:
330171-01-10-10-02-00Order(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockDescription:
3300 5 mm Proximity ProbePrice:
AskA compact 1/4-28 UNF 5 mm probe with a 1.0 in case and 1.0 m lead for tight shaft-vibration and position measurement locations.
The 3300 5 mm probe keeps the electrical behavior of the 3300 XL 5/8 mm system while fitting locations that cannot accept an 8 mm probe body. It is suited to compact brackets and bearing housings where side clearance and tip size drive the mechanical choice. The compact tip and case are the main mechanical reasons to choose 330171-01-10-10-02-00.
This configuration uses a 0.1 in unthreaded length, 1.0 in overall case and a 1.0 m integral lead. The miniature ClickLoc connector is supplied on standard cable without a protector, and code 00 selects no agency approval option. Together, the option codes define the exact installation geometry of 330171-01-10-10-02-00.
Compact packaging does not remove system-matching requirements. Confirm thread depth, target size, extension cable and Proximitor Sensor before installation, then compare gap voltage and vibration with the previous baseline at the same machine state. Keeping 330171-01-10-10-02-00 with the complete chain record avoids a visually similar but electrically wrong spare.
It fits applications where the 8 mm probe is physically too large. Confirm side clearance and target size rather than choosing it solely from the part number.
Measure the original insertion depth, thread engagement and available adjustment so the new tip reaches the target without bottoming.
Use the approved 3300 XL extension cable and matching Proximitor Sensor for the selected total system length; arbitrary combinations can change scale and linearity.
Bracket motion, cable movement, poor connector seating, electrical noise or a rough target surface can affect dynamic data even when static gap appears normal.
Excess engagement can bind the case and damage the installation. Keep 1/4-28 engagement within 0.375 in and preserve adjustment travel.
Record gap voltage, vibration amplitude, speed, load, probe insertion depth and every component in the measurement chain.
Products supplied by ApterPLC are covered for 12 months under the applicable sales terms. Keep the complete unit nameplate and transaction record so the exact product can be identified during technical support.
The attached selection contains the official description, performance data, environmental limits, ordering codes and product drawings relevant to 330171-01-10-10-02-00. Unrelated catalog pages have been removed.
|
330104-06-12-10-02-00 |
330130-035-00-00 |
330130-040-02-00 |
|
330104-06-14-50-02-00 |
330130-035-00-CN |
330130-045-00-00 |
|
330104-10-18-10-01-00 |
330130-030-01-CN |
330130-045-00-05 |
|
330104-10-20-05-02-00 |
330106-00-04-10-02-00 |
330130-040-00-00 |
|
330104-10-20-10-02-05 |
330106-05-30-05-02-00 |
330130-040-00-05 |
|
330104-12-20-10-01-00 |
330105-02-12-50-02-00 |
330130-040-01-05 |
|
330104-13-20-10-02-00 |
330106-05-30-10-02-00 |
330130-045-01-00 |
|
330104-15-23-10-02-00 |
330106-05-30-10-02-05 |
330130-045-02-05 |
|
330104-19-25-10-11-05 |
330106-05-30-15-02-00 |
330130-045-03-05 |
|
330105-02-12-05-02-00 |
330106-05-30-50-02-00 |
330130-035-01-CN |
|
330105-02-12-05-02-05 |
330130-00-05-05-02-00 |
330130-045-00-CN |
|
330105-02-12-10-02-00 |
330106-05-30-05-02-CN |
330130-045-01-CN |
|
330105-02-12-15-12-05 |
330106-05-30-10-02-CN |
330130-040-00-CN |
|
330105-02-12-15-12-CN |
330106-05-30-15-02-CN |
330130-040-02-CN |
|
330105-02-12-05-02-CN |
330106-05-30-20-02-CN |
330130-040-10-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
