Nine-metre pairing
A supported 1.5 m probe lead and 7.5 m cable form the intended total.
Bently Nevada 330130-075-00-00 is a 7.5 m (24.6 ft) standard cable for matched 3300 XL 8 mm proximity measurement systems.
Item NO.:
330130-075-00-00Order(MOQ):
1Goods Stock:
37Payment:
T/TLead Time：
In stockWeight:
0.32KGDimension:
20.5x22x3cmDescription:
EXTENSION CABLEPrice:
AskSend the complete nameplate, installed probe/cable/sensor context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
nine-metre arithmetic and spare segregation
The intended nine-metre chain is reached when 330130-075-00-00 is paired with a supported 1.5 m probe lead and the corresponding Proximitor Sensor. This pairing makes the 7.5 m cable a specific system choice, not an approximate route length.
Because nearby 7.0, 7.5 and 8.0 m coils can look alike, 330130-075-00-00 belongs in a separately identified storage position with its label visible. Procurement and maintenance should work from the complete code rather than coil diameter.
During installation, 330130-075-00-00 must remain whole and supported above the stated bend-radius limit. Recheck both ClickLoc joints and probe gap after movement instead of compressing surplus cable into a tight enclosure.
Fast release checks
A supported 1.5 m probe lead and 7.5 m cable form the intended total.
Store and receive by complete code because nearby lengths are visually difficult to distinguish.
Route the full cable without trimming, splicing or compressed loops.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Extension Cable |
| Ordering family | 330130 |
| Cable length option | 7.5 m (24.6 ft) |
| Cable / connector option | Standard cable |
| System matching | Probe lead plus extension cable must equal the selected Proximitor Sensor total length |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Agency approval option | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Engineering focus
The Proximitor Sensor total must equal the 1.5 m probe lead plus the 7.5 m extension cable.
Keep the full run above the 25.4 mm bend radius and prevent pull or vibration from reaching either connector.
Primary technical risk
A 7.5 m coil can be mistaken for an adjacent length during a fast outage. Verify the full label and the supported 1.5 m probe lead before issue, then route the cable without trimming or tight storage loops. Stop commissioning if the nine-metre total cannot be proven from component identities.
Before ordering or commissioning
Tie the 7.5 m label to the 1.5 m probe and nine-metre sensor before the cable leaves the storeroom.
Buyer and engineer situations
Yes, that supported length combination totals nine metres. Confirm the three exact labels before installation.
The total would no longer be the documented nine-metre chain. Stop and select the extension length that matches the installed probe and Proximitor Sensor.
Use a dedicated, clearly labeled location and keep the readable nameplate visible. Do not rely on coil diameter or color to distinguish lengths.
No. Preserve the minimum bend radius and support the full cable; revise the enclosure or route instead of compressing the coil.
Check the 1.5 m plus 7.5 m total, connector seating, cable damage and probe gap before altering monitor settings.
Match the complete 075 code, inspect both connector ends and the jacket, and compare the delivered item with the purchase order and route requirement.
ApterPLC supply capability
New original supply: Exact-model review is used to support quality-focused sourcing.
Current and discontinued products: Our network supports routine, scarce and hard-to-find industrial automation parts.
Responsive after-sales service: We assist with delivery coordination, incoming identity checks and post-purchase questions.
Official naming references
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
The official family document defines the 330130 ordering options, but we could not verify an official English PDF that directly identifies this complete model. Send the full probe, extension-cable and Proximitor Sensor labels so the applicable manufacturer document can be checked without assuming compatibility.
|
330104-00-04-10-02-05 |
330104-00-09-05-02-00 |
330104-00-18-10-02-00 |
|
330104-00-04-50-11-00 |
330104-00-10-10-02-00 |
330104-00-20-05-02-00 |
|
330104-00-05-05-02-00 |
330104-00-10-10-02-05 |
330104-00-20-10-02-00 |
|
330104-00-05-10-02-00 |
330104-00-11-05-02-00 |
330104-00-22-10-02-00 |
|
330104-00-05-50-02-00 |
330104-00-12-05-02-00 |
330104-00-22-10-02-05 |
|
330104-00-06-05-02-00 |
330104-00-12-10-02-00 |
330104-00-24-10-02-00 |
|
330104-00-06-10-02-00 |
330104-00-12-10-02-05 |
330104-00-25-10-02-00 |
|
330104-00-06-10-11-00 |
330104-00-13-10-02-00 |
330104-00-25-10-02-05 |
|
330104-00-07-05-02-00 |
330104-00-14-10-02-05 |
330104-01-05-10-02-00 |
|
330104-00-07-90-02-00 |
330104-00-15-05-02-00 |
330104-01-06-10-02-00 |
|
330104-00-08-05-02-00 |
330104-00-15-10-02-00 |
330104-03-06-05-02-00 |
|
330104-00-08-10-02-00 |
330104-00-16-10-02-00 |
330104-03-06-10-02-00 |
|
330104-00-07-10-02-CN |
330104-00-16-10-02-CN |
330104-05-10-10-02-05 |
|
330104-00-06-10-02-CN |
330104-00-08-10-02-CN |
330104-05-13-10-02-00 |
|
330104-00-04-10-02-CN |
330104-00-15-10-01-CN |
330104-05-15-05-02-00 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
