Complete the supported chain
A supported 0.5 m probe lead plus this 4.5 m cable reaches the five-metre system total.
Item NO.:
33013004500CNOrder(MOQ):
1Goods Stock:
36Payment:
T/TLead Time：
In stockWeight:
0.22KGDimension:
20.4x22.2x3.5cmDescription:
EXTENSION CABLEPrice:
AskSend the complete nameplate, installed probe/cable/sensor context, quantity and destination. We support new original, discontinued and difficult-to-source industrial parts.
Manager: JimPei
five-metre chain completion with standard-cable route protection
For a planned five-metre replacement, 330130-045-00-CN provides the 4.5 m standard extension-cable portion when the installed probe carries the supported 0.5 m lead. The selected Proximitor Sensor must be the five-metre version, so route reach alone is not the selection rule.
System matching remains the governing decision: 330130-045-00-CN has to be read together with the probe and Proximitor labels, and both ClickLoc joints must be clean, aligned and fully seated before service resumes.
Because its construction is standard rather than armored, 330130-045-00-CN relies on the tray, conduit or enclosure for protection from abrasion, crushing and repeated movement. Keep the complete -CN identity on the RFQ and receiving record.
Fast release checks
A supported 0.5 m probe lead plus this 4.5 m cable reaches the five-metre system total.
Plan support against abrasion, crushing, movement and connector loading along the actual route.
Keep the complete -CN code on the RFQ, quotation and receiving record.
Official configuration plus supply terms
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Extension Cable |
| Ordering family | 330130 |
| Cable length option | 4.5 m (14.8 ft) |
| Cable / connector option | Standard cable |
| System matching | Probe lead plus extension cable must equal the selected Proximitor Sensor total length |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Agency approval option | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Engineering focus
Confirm the probe, cable and Proximitor Sensor as one documented 3300 XL 8 mm chain; connector fit alone does not establish the correct electrical length.
Maintain the 25.4 mm minimum bend radius and support both ClickLoc ends so the connection carries no pull or repeated flexing.
Primary technical risk
A 4.5 m label does not by itself prove that the replacement chain is correct. Read the probe-lead and Proximitor total lengths before installation, then inspect both ClickLoc joints and the standard-cable route. Stop the job if any component identity, cable damage or connector condition remains uncertain.
Before ordering or commissioning
Verify the supported 0.5 m probe lead, the five-metre Proximitor Sensor, the full cable code and the route protection before the outage kit is released.
Buyer and engineer situations
Yes, those lengths total five metres when all three components are the supported 3300 XL 8 mm versions. Confirm the probe and Proximitor labels before installation.
This is the standard-cable option. Add suitable support or enclosure protection for abrasion, crushing and movement, or stop and review the official armored configuration.
Recheck the total system length, ClickLoc seating and probe gap first. Correct any disturbed mechanical or connection condition before changing monitor scaling.
Send the full cable label, probe and Proximitor labels, required system length, route condition, quantity and destination. Keep the complete suffix exactly as marked.
The manufacturer documents physical and electrical interchangeability for the relevant 5 mm and 8 mm components, but the mixed chain is limited to non-XL performance. Engineering should accept that boundary before use.
Match the full label to the purchase order, inspect both connectors and the standard-cable jacket, and quarantine the item if the suffix or physical condition cannot be read clearly.
ApterPLC supply capability
New original supply: Exact-model review is used to support quality-focused sourcing.
Current and discontinued products: Our network supports routine, scarce and hard-to-find industrial automation parts.
Responsive after-sales service: We assist with delivery coordination, incoming identity checks and post-purchase questions.
Official naming references
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
330104-00-04-10-02-05 |
330104-00-09-05-02-00 |
330104-00-18-10-02-00 |
|
330104-00-04-50-11-00 |
330104-00-10-10-02-00 |
330104-00-20-05-02-00 |
|
330104-00-05-05-02-00 |
330104-00-10-10-02-05 |
330104-00-20-10-02-00 |
|
330104-00-05-10-02-00 |
330104-00-11-05-02-00 |
330104-00-22-10-02-00 |
|
330104-00-05-50-02-00 |
330104-00-12-05-02-00 |
330104-00-22-10-02-05 |
|
330104-00-06-05-02-00 |
330104-00-12-10-02-00 |
330104-00-24-10-02-00 |
|
330104-00-06-10-02-00 |
330104-00-12-10-02-05 |
330104-00-25-10-02-00 |
|
330104-00-06-10-11-00 |
330104-00-13-10-02-00 |
330104-00-25-10-02-05 |
|
330104-00-07-05-02-00 |
330104-00-14-10-02-05 |
330104-01-05-10-02-00 |
|
330104-00-07-90-02-00 |
330104-00-15-05-02-00 |
330104-01-06-10-02-00 |
|
330104-00-08-05-02-00 |
330104-00-15-10-02-00 |
330104-03-06-05-02-00 |
|
330104-00-08-10-02-00 |
330104-00-16-10-02-00 |
330104-03-06-10-02-00 |
|
330104-00-07-10-02-CN |
330104-00-16-10-02-CN |
330104-05-10-10-02-05 |
|
330104-00-06-10-02-CN |
330104-00-08-10-02-CN |
330104-05-13-10-02-00 |
|
330104-00-04-10-02-CN |
330104-00-15-10-01-CN |
330104-05-15-05-02-00 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
