8 mm extension cable
Item NO.:
330130-040-03-00Order(MOQ):
1Goods Stock:
17Payment:
T/TLead Time：
In stockWeight:
2.15KGDimension:
41.5x20.5x5cmDescription:
EXTENSION CABLEPrice:
AskA 4.0 m armored extension cable with a connector protector for a matched 3300 XL 8 mm proximity measurement chain.
4.0 m cable · stainless-steel armor · connector protector · approval option 00
330130-040-03-00 is a 3300 XL 8 mm Armored Extension Cable in the 3300 XL 8 mm Proximity Transducer System. A 4.0 m armored extension cable with a connector protector for a matched 3300 XL 8 mm proximity measurement chain.
Its documented configuration is 4.0 m cable · stainless-steel armor · connector protector · approval option 00. These order-code choices define how the component fits the signal path and should be reviewed together rather than by appearance alone.
For maintenance or procurement, 330130-040-03-00 should be matched to the installed system role, connection architecture and complete manufacturer label. ApterPLC can review those details before quotation.
The selection identity for 330130-040-03-00 is built from the full code and its verified system role.
8 mm extension cable
4.0 m cable length
Armored + protector
Approval not required
Identify the installed 8 mm probe lead length.
Add the 4.0 m armored extension without changing the required total electrical length.
Use the 3300 XL 8 mm sensor calibrated for the completed system length.
| Product family | 3300 XL 8 mm Proximity Transducer System |
|---|---|
| Component type | Armored extension cable |
| Cable length | 4.0 m |
| Cable construction | FEP-insulated cable with stainless-steel armor |
| Connector protection | Connector protector included |
| Minimum bend radius | 25.4 mm |
| Cable operating temperature | -51 to +177 °C |
| Nominal capacitance | 69.9 pF/m |
| Approval option | 00 — not required |
| Payment | T/T |
| Goods Stock | 17 |
| Weight | 2.15KG |
| Dimension | 41.5x20.5x5cm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Connector fit is not enough. The cable belongs in an 8 mm chain whose probe lead plus extension length matches the Proximitor Sensor; stop the substitution if the total electrical length differs.
The protector is intended to shield the cable connection. Keep the ClickLoc connection clean and within the 25.4 mm bend-radius limit so protection does not introduce cable stress.
We would not recommend that shortcut because the armored construction changes routing stiffness and clearance. Confirm the installed route and the same 4.0 m electrical requirement before fitting it.
Option 00 is the documented no-approval-required configuration. If the project needs CSA, ATEX or IECEx coverage, select the certified order-code option instead of treating this cable as equivalent.
Start with the matched 8 mm family and total system length, then inspect the probe-to-cable connection and routing. A length mismatch or stressed connection can invalidate the intended chain even when the cable appears intact.
Provide the complete labels for the probe, extension cable and Proximitor Sensor plus the installed route length. That lets the quotation preserve both the 4.0 m option and the correct measurement-chain total.
Complete labels are compared with the official order-code structure.
Connected probes, cables, I/O and monitoring roles are reviewed together.
Logistics and project timing are confirmed with the commercial offer.
Coverage begins on the shipment date unless the confirmed quotation states otherwise. Scope and available remedy follow the confirmed quotation and sales agreement.
Keep the full 330130-040-03-00 label and order reference.
Add connector, mounting and associated signal-path photos.
Describe the observed symptom and operating context clearly.
Baker Hughes 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AL is the official family document used to verify this product identity, order-code fields and applicable technical context.
Document access: Request the verified manufacturer datasheet for the exact model offered.
Request Verified DatasheetRelated Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
