Connector protector included by option
The 02 selection changes the physical envelope around the probe-to-extension connection.
Item NO.:
330130-040-02-00Order(MOQ):
1Goods Stock:
34Payment:
T/TLead Time：
In stockWeight:
0.22KGDimension:
20.4x22.4x3.5cmDescription:
CABLE EXTENTIONPrice:
AskSend the full probe, extension-cable and Proximitor labels, required system length, route and protection details, quantity and destination. We support current, discontinued and difficult-to-source industrial parts.
Protection-first field guidance with clearance verification
330130-040-02-00 is the 4.0 m standard extension cable with connector-protector option for a 3300 XL 8 mm proximity measurement chain. The protected joint is valuable where environmental exposure is a concern, but it occupies more space than the standard connection and must be planned into the route.
330130-040-02-00 still depends on the probe lead and Proximitor Sensor for its valid total electrical length. Confirm all three labels before installation, then verify that the enclosure, conduit entry and support points can accept the protector without loading or sharply bending the joint.
330130-040-02-00 should be handled as a protected connection, not as a pulling point. Preserve the stated bend radius on both sides, support the adjoining cable and keep the protector accessible enough for inspection during future maintenance.
Decision highlights
The 02 selection changes the physical envelope around the probe-to-extension connection.
Model the enclosure entry, straight length and support points before the cable is installed.
The protected joint does not remove the requirement for a supported total system length.
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Extension Cable |
| Ordering family | 330130 |
| Cable length option | 4.0 m (13.1 ft) |
| Cable / connector option | Standard cable with connector protector |
| System matching | Probe lead plus extension cable must equal the selected Proximitor Sensor total length |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Agency approval option | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Technical notes
330130-040-02-00 includes the connector-protector option, which increases the joint envelope and can conflict with a tight enclosure or conduit entry. Check straight clearance and support on both sides before installation. Stop if the protected joint must be used as a bend, pull point or forced transition through the route.
Connector protection improves the joint arrangement, but it does not replace the required cable support, bend control or site enclosure practices. The full installed environment still determines whether the route is acceptable.
Decision gate
Add the connector-protector envelope to the installation drawing and verify access for inspection. If the route only fits the unprotected joint, redesign the entry rather than removing the ordered protection feature.
Buyer and engineer support
It is useful when the probe-to-extension joint needs added environmental protection and the enclosure has enough space for the larger assembly. Confirm the actual exposure and route before choosing it.
The electrical length may match, but the protected joint has a different physical envelope. Verify enclosure, conduit-entry and service-access clearance before approving the replacement.
Relocate the joint or change the route so it has a supported straight section. Do not use the protector as the bend or pulling point, and preserve the cable bend radius on both sides.
No. It addresses the connector arrangement, while the remaining cable, enclosure and site conditions still require review. Confirm the manufacturer and plant requirements for the complete exposed route.
The fault may still involve total system length, probe gap, target condition or a damaged connector beneath the protection. Inspect the complete chain before changing monitor configuration.
Request the full label, both cable ends, the connector-protector assembly and overall cable condition. Include the probe and Proximitor labels in the RFQ so the 4.0 m cable is tied to the correct system.
Supply capability
Quality-focused sourcing: We support exact-model review for new original industrial automation parts.
Current, discontinued and hard-to-find products: Send the complete nameplate and system context so the required configuration can be checked before quotation.
Responsive after-sales support: Our team assists with delivery coordination, incoming identity checks and post-purchase questions.
Search references
Purchase protection
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Need warranty support for 330130-040-02-00? Send the order reference, full nameplate photograph and a clear description of the issue.
Product names and trademarks remain the property of their respective owners. Apter is an independent supplier.
Document access
No verified model-specific English PDF is currently linked to this page. Send the complete model and installed-system details so the applicable manufacturer document can be checked before procurement, installation or compliance decisions.
| 330103-08-15-10-02-00 | 330103-08-15-10-02-00 | 330104-00-06-10-02-00 |
| 330103-10-14-10-02-05 | 330103-10-14-10-02-05 | 330104-00-06-10-11-00 |
| 330103-12-25-10-01-00 | 330103-12-25-10-01-00 | 330104-00-07-05-02-00 |
| 330103-12-25-10-02-00 | 330103-12-25-10-02-00 | 330104-00-07-90-02-00 |
| 330103-13-23-05-02-00 | 330103-13-23-05-02-00 | 330104-00-08-05-02-00 |
| 330104-00-02-10-02-00 | 330104-00-02-10-02-00 | 330104-00-08-10-02-00 |
| 330104-00-04-05-02-00 | 330104-00-04-05-02-00 | 330104-00-09-05-02-00 |
| 330104-00-04-10-02-00 | 330104-00-04-10-02-00 | 330104-00-10-10-02-00 |
| 330104-00-04-10-02-05 | 330104-00-04-10-02-05 | 330104-00-10-10-02-05 |
| 330104-00-04-50-11-00 | 330104-00-04-50-11-00 | 330104-00-11-05-02-00 |
| 330104-00-05-05-02-00 | 330104-00-05-05-02-00 | 330104-00-12-05-02-00 |
| 330103-07-16-05-02-00 | 330104-00-05-10-02-00 | 330104-00-12-10-02-00 |
| 330103-15-23-05-02-CN | 330103-10-20-05-02-CN | 330104-00-07-10-02-CN |
| 330104-00-04-10-02-CN | 330103-15-23-05-02-CN | 330104-00-08-10-02-CN |
| 330103-10-20-05-02-CN | 330104-00-04-10-02-CN | 330104-00-06-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
