Match the chain before removal
Record all three component labels and the existing route before disturbing the measurement loop.
Item NO.:
330130-040-00-00Order(MOQ):
1Goods Stock:
30Payment:
T/TLead Time：
In stockWeight:
0.2KGDimension:
20.3x22.2x3.5cmDescription:
CABLE EXTENSIONPrice:
AskSend the full probe, extension-cable and Proximitor labels, required system length, route and protection details, quantity and destination. We support current, discontinued and difficult-to-source industrial parts.
Symptom-first maintenance briefing with a chain-matching close
330130-040-00-00 is the 4.0 m standard extension-cable selection in the 3300 XL 8 mm proximity transducer system. During a maintenance replacement, its purpose is to restore the specified electrical length between the installed probe lead and Proximitor Sensor—not merely to replace a cable that looks similar.
330130-040-00-00 should be released only after the old probe, extension cable and Proximitor labels have been read as one chain. The probe lead plus extension cable must equal the total length supported by the selected Proximitor Sensor, while every ClickLoc connection must be clean, aligned and fully seated.
330130-040-00-00 uses standard cable construction, so the route needs independent protection wherever abrasion, crushing, contamination or repeated movement is possible. Maintain the manufacturer bend-radius limit and keep the connector joint out of pulling or bending loads before the channel is returned to service.
Decision highlights
Record all three component labels and the existing route before disturbing the measurement loop.
The length is part of the calibrated system arrangement, not spare cable that can be trimmed or extended.
Plan support and external protection separately because this configuration is not the armored or protector-equipped option.
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Extension Cable |
| Ordering family | 330130 |
| Cable length option | 4.0 m (13.1 ft) |
| Cable / connector option | Standard cable |
| System matching | Probe lead plus extension cable must equal the selected Proximitor Sensor total length |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Agency approval option | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Technical notes
330130-040-00-00 can physically connect to other 3300-family components without proving that the finished channel has the required electrical length or performance. Confirm the complete probe, extension-cable and Proximitor identities first, then inspect the standard-cable route. Stop the replacement if any label or component length remains uncertain.
The manufacturer documents physical and electrical interchangeability with non-XL 3300 5 mm/8 mm components, but a mixed chain is limited to the performance of the non-XL system. Treat that as an engineering decision, not an automatic spare substitution.
Decision gate
Use the old labels, a route photograph and the selected Proximitor total length to check the order. After installation, recheck connector seating and probe gap before changing monitor scaling if the reading has moved.
Buyer and engineer support
Recheck the total probe-plus-extension length, both ClickLoc joints and the probe gap first. A disturbed connector or measurement geometry can move the channel, so changing monitor scaling before those checks can hide the installation issue.
The manufacturer permits XL and non-XL 5 mm/8 mm components to be physically and electrically mixed, but the completed chain is limited to non-XL performance. Confirm that reduced boundary is acceptable for the measurement before approving the substitution.
Keep the stated bend radius, add suitable external route protection and support the cable so the ClickLoc joint carries no pull. If the route cannot protect standard cable, review an official armored or connector-protected configuration instead.
Provide photographs of the probe, cable and Proximitor labels, the required total system length, connector condition, cable route, quantity and destination. That information allows the supplier to match the complete measurement chain rather than quote by length alone.
No special tool is required for the manufacturer ClickLoc connection. Stop, inspect alignment and connector condition, and replace a damaged mating part instead of applying extra torque.
Match the complete label to the purchase order, inspect cable construction and connector condition, and compare the delivered item with the route requirement. Do not accept a coil based only on approximate length or connector appearance.
Supply capability
Quality-focused sourcing: We support exact-model review for new original industrial automation parts.
Current, discontinued and hard-to-find products: Send the complete nameplate and system context so the required configuration can be checked before quotation.
Responsive after-sales support: Our team assists with delivery coordination, incoming identity checks and post-purchase questions.
Search references
Purchase protection
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Need warranty support for 330130-040-00-00? Send the order reference, full nameplate photograph and a clear description of the issue.
Product names and trademarks remain the property of their respective owners. Apter is an independent supplier.
Document access
No verified model-specific English PDF is currently linked to this page. Send the complete model and installed-system details so the applicable manufacturer document can be checked before procurement, installation or compliance decisions.
| 330103-08-15-10-02-00 | 330103-08-15-10-02-00 | 330104-00-06-10-02-00 |
| 330103-10-14-10-02-05 | 330103-10-14-10-02-05 | 330104-00-06-10-11-00 |
| 330103-12-25-10-01-00 | 330103-12-25-10-01-00 | 330104-00-07-05-02-00 |
| 330103-12-25-10-02-00 | 330103-12-25-10-02-00 | 330104-00-07-90-02-00 |
| 330103-13-23-05-02-00 | 330103-13-23-05-02-00 | 330104-00-08-05-02-00 |
| 330104-00-02-10-02-00 | 330104-00-02-10-02-00 | 330104-00-08-10-02-00 |
| 330104-00-04-05-02-00 | 330104-00-04-05-02-00 | 330104-00-09-05-02-00 |
| 330104-00-04-10-02-00 | 330104-00-04-10-02-00 | 330104-00-10-10-02-00 |
| 330104-00-04-10-02-05 | 330104-00-04-10-02-05 | 330104-00-10-10-02-05 |
| 330104-00-04-50-11-00 | 330104-00-04-50-11-00 | 330104-00-11-05-02-00 |
| 330104-00-05-05-02-00 | 330104-00-05-05-02-00 | 330104-00-12-05-02-00 |
| 330103-07-16-05-02-00 | 330104-00-05-10-02-00 | 330104-00-12-10-02-00 |
| 330103-15-23-05-02-CN | 330103-10-20-05-02-CN | 330104-00-07-10-02-CN |
| 330104-00-04-10-02-CN | 330103-15-23-05-02-CN | 330104-00-08-10-02-CN |
| 330103-10-20-05-02-CN | 330104-00-04-10-02-CN | 330104-00-06-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
