Useful five-metre combination
A supported 1.5 m probe lead plus this 3.5 m extension cable completes the five-metre electrical chain.
Item NO.:
330130-035-01-CNOrder(MOQ):
1Goods Stock:
27Payment:
T/TLead Time：
In stockWeight:
0.36KGDimension:
27x27x2.5cmDescription:
EXTENSION CABLEPrice:
AskSend the full probe, extension-cable and Proximitor labels, required system length, route and protection details, quantity and destination. We support current, discontinued and difficult-to-source industrial parts.
Route-first installation note with dimensional checks
330130-035-01-CN is a 3.5 m armored extension cable for the 3300 XL 8 mm proximity transducer system. It is most useful when the planned route needs mechanical protection, but the armor does not change the requirement to match the probe lead and Proximitor Sensor as one supported electrical system.
330130-035-01-CN can form a five-metre chain with a supported 1.5 m probe lead. Before pulling the cable, confirm that combination from the installed labels and check the conduit, gland and enclosure entries for the armored termination and ClickLoc connector envelope.
330130-035-01-CN should be supported so the armor and connector do not carry repeated flexing, pull or sharp bending. The -CN suffix is retained as part of the exact order identity only; no different technical rating, approval or application is inferred from that suffix.
Decision highlights
A supported 1.5 m probe lead plus this 3.5 m extension cable completes the five-metre electrical chain.
Check glands, conduit bends and enclosure entries before the cable is pulled into place.
Keep the complete -CN code on the RFQ and receiving record without translating it into an unverified technical claim.
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Extension Cable |
| Ordering family | 330130 |
| Cable length option | 3.5 m (11.5 ft) |
| Cable / connector option | Armored cable |
| System matching | Probe lead plus extension cable must equal the selected Proximitor Sensor total length |
| Minimum bend radius | 25.4 mm (1.0 in) |
| Order-code identity | Full CN suffix retained; confirm the complete nameplate before replacement. No approval rating is inferred. |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Technical notes
330130-035-01-CN adds armored-cable construction, but armor does not remove the published minimum bend radius or make the connector a pulling point. Check the tightest conduit bend, gland entry and enclosure clearance before installation. Stop the pull if the armor termination or ClickLoc joint must be forced through the route.
The manufacturer supplies silicone tape with extension cables but does not recommend it where the probe-to-extension connection is exposed to turbine oil. Use the manufacturer connector-protection approach and the site installation requirements for that environment.
Decision gate
A correct 3.5 m label is only half of the decision. Confirm the paired probe lead, selected Proximitor Sensor, bend clearance and termination space before the cable is released to the installer.
Buyer and engineer support
Yes, that combination totals five metres when the probe and Proximitor Sensor belong to the supported 3300 XL 8 mm chain. Confirm all component labels before installation rather than relying on the arithmetic alone.
Measure the smallest bend, gland opening and enclosure-entry clearance for the armored termination and ClickLoc connector. Reroute or open the installation if the assembly would need to be forced or bent below the manufacturer limit.
No. Support the route so neither the armor termination nor the ClickLoc joint carries pull, repeated flexing or equipment vibration. Armor protects the cable construction but does not make the connector a strain-relief point.
Do not rely on the supplied silicone tape where the probe-to-extension joint is exposed to turbine oil. Review the manufacturer connector-protection solution and the site enclosure or routing requirement before commissioning.
Send clear images of the full extension-cable label, both connectors, armor termination, probe label and Proximitor label, plus the planned route. A coil-only photograph cannot establish the exact configuration or completed system length.
Stop and inspect the mating surfaces, alignment and connector condition. The connection is designed for finger-tight assembly, so extra torque can damage a part without correcting contamination or misalignment.
Supply capability
Quality-focused sourcing: We support exact-model review for new original industrial automation parts.
Current, discontinued and hard-to-find products: Send the complete nameplate and system context so the required configuration can be checked before quotation.
Responsive after-sales support: Our team assists with delivery coordination, incoming identity checks and post-purchase questions.
Search references
Purchase protection
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Need warranty support for 330130-035-01-CN? Send the order reference, full nameplate photograph and a clear description of the issue.
Product names and trademarks remain the property of their respective owners. Apter is an independent supplier.
Document access
No verified model-specific English PDF is currently linked to this page. Send the complete model and installed-system details so the applicable manufacturer document can be checked before procurement, installation or compliance decisions.
| 330103-08-15-10-02-00 | 330103-08-15-10-02-00 | 330104-00-06-10-02-00 |
| 330103-10-14-10-02-05 | 330103-10-14-10-02-05 | 330104-00-06-10-11-00 |
| 330103-12-25-10-01-00 | 330103-12-25-10-01-00 | 330104-00-07-05-02-00 |
| 330103-12-25-10-02-00 | 330103-12-25-10-02-00 | 330104-00-07-90-02-00 |
| 330103-13-23-05-02-00 | 330103-13-23-05-02-00 | 330104-00-08-05-02-00 |
| 330104-00-02-10-02-00 | 330104-00-02-10-02-00 | 330104-00-08-10-02-00 |
| 330104-00-04-05-02-00 | 330104-00-04-05-02-00 | 330104-00-09-05-02-00 |
| 330104-00-04-10-02-00 | 330104-00-04-10-02-00 | 330104-00-10-10-02-00 |
| 330104-00-04-10-02-05 | 330104-00-04-10-02-05 | 330104-00-10-10-02-05 |
| 330104-00-04-50-11-00 | 330104-00-04-50-11-00 | 330104-00-11-05-02-00 |
| 330104-00-05-05-02-00 | 330104-00-05-05-02-00 | 330104-00-12-05-02-00 |
| 330103-07-16-05-02-00 | 330104-00-05-10-02-00 | 330104-00-12-10-02-00 |
| 330103-15-23-05-02-CN | 330103-10-20-05-02-CN | 330104-00-07-10-02-CN |
| 330104-00-04-10-02-CN | 330103-15-23-05-02-CN | 330104-00-08-10-02-CN |
| 330103-10-20-05-02-CN | 330104-00-04-10-02-CN | 330104-00-06-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
