Check the installed extension cable
Reuse requires readable identity, correct remaining length, clean connectors and acceptable physical condition.
Item NO.:
330106-05-30-15-02-CNOrder(MOQ):
1Goods Stock:
34Payment:
T/TLead Time：
In stockWeight:
0.06KGDimension:
20.5x22.4x3.3cmDescription:
PROXIMITY PROBESPrice:
AskSend the full probe and Proximitor labels, mounting drawing, target details, required system length, quantity and destination. We support current, discontinued and difficult-to-source industrial parts.
Condition-based reuse decision with calibration safeguards
330106-05-30-15-02-CN is a 1.5 m lead, M10 × 1 reverse-mount probe in the Bently Nevada 3300 XL 8 mm family. During a maintenance replacement, the immediate question is whether the existing extension cable and Proximitor Sensor can remain in service as a known, supported chain.
330106-05-30-15-02-CN can participate in a five- or nine-metre arrangement only when the reused extension cable completes the correct total length and passes identity and condition checks. Connector cleanliness, cable damage and readable labels matter as much as the nominal 1.5 m probe lead.
330106-05-30-15-02-CN is specified against the manufacturer system performance established on AISI 4140 steel unless another target calibration is documented. The -CN suffix is preserved exactly for product identity, without assigning a separate technical rating or regional configuration.
Decision highlights
Reuse requires readable identity, correct remaining length, clean connectors and acceptable physical condition.
Non-AISI 4140 targets need the applicable manufacturer calibration decision before measurement acceptance.
Use the exact -CN code in procurement without adding unsupported technical meaning.
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Reverse Mount Probe |
| Ordering family | 330106 |
| Mounting thread | M10 × 1 |
| Probe geometry | 5 mm unthreaded length; 30 mm overall case |
| Integral lead length | 1.5 m (4.9 ft) |
| Connector option | Miniature ClickLoc coaxial connector |
| System matching | Complete the probe and any extension cable to the selected Proximitor Sensor total length |
| Order-code identity | Full CN suffix retained; confirm the complete nameplate before replacement. No approval rating is inferred. |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Technical notes
330106-05-30-15-02-CN is evaluated within a system whose standard performance is specified on AISI 4140 steel. If the machine target differs, do not correct the apparent bias by changing monitor scaling first. Record the material, gap and full chain, then obtain the applicable manufacturer calibration decision before accepting the channel.
A reused extension cable must complete the selected five- or nine-metre system and have readable identity, undamaged construction and clean ClickLoc interfaces. Unknown length or condition is a reason to stop, not a basis for assumption.
Decision gate
Before condemning the new probe, verify target material, operating gap, connector seating and reused cable identity. That order prevents calibration differences from being mistaken for a defective replacement.
Buyer and engineer support
Retain it only if the label confirms the correct remaining length for the selected Proximitor Sensor and inspection finds no cable or connector damage. Unknown identity or condition warrants replacement.
Confirm the exact target material and operating gap, because standard performance is specified on AISI 4140 steel. Obtain the applicable manufacturer calibration guidance before changing channel scaling.
Align clean mating parts and tighten by hand until the designed click is felt. If it does not click, stop and inspect for contamination, misalignment or damage rather than using a tool.
Check the M10 × 1 bracket thread, thickness, adjustment range, target reach and rear cable clearance. The case must position freely without binding or bottoming out.
Verify the complete probe-plus-extension length, Proximitor identity and target material against the supported system. Escalate with those labels and readings before changing configuration.
Use the complete code exactly as shown and provide nameplate photographs, the required system length, mounting drawing and target material. Treat -CN as identity only unless the manufacturer supplies further evidence.
Supply capability
Quality-focused sourcing: We support exact-model review for new original industrial automation parts.
Current, discontinued and hard-to-find products: Send the complete nameplate and system context so the required configuration can be checked before quotation.
Responsive after-sales support: Our team assists with delivery coordination, incoming identity checks and post-purchase questions.
Search references
Purchase protection
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Need warranty support for 330106-05-30-15-02-CN? Send the order reference, full nameplate photograph and a clear description of the issue.
Product names and trademarks remain the property of their respective owners. Apter is an independent supplier.
Document access
No verified model-specific English PDF is currently linked to this page. Send the complete model and installed-system details so the applicable manufacturer document can be checked before procurement, installation or compliance decisions.
| 330103-08-15-10-02-00 | 330103-08-15-10-02-00 | 330104-00-06-10-02-00 |
| 330103-10-14-10-02-05 | 330103-10-14-10-02-05 | 330104-00-06-10-11-00 |
| 330103-12-25-10-01-00 | 330103-12-25-10-01-00 | 330104-00-07-05-02-00 |
| 330103-12-25-10-02-00 | 330103-12-25-10-02-00 | 330104-00-07-90-02-00 |
| 330103-13-23-05-02-00 | 330103-13-23-05-02-00 | 330104-00-08-05-02-00 |
| 330104-00-02-10-02-00 | 330104-00-02-10-02-00 | 330104-00-08-10-02-00 |
| 330104-00-04-05-02-00 | 330104-00-04-05-02-00 | 330104-00-09-05-02-00 |
| 330104-00-04-10-02-00 | 330104-00-04-10-02-00 | 330104-00-10-10-02-00 |
| 330104-00-04-10-02-05 | 330104-00-04-10-02-05 | 330104-00-10-10-02-05 |
| 330104-00-04-50-11-00 | 330104-00-04-50-11-00 | 330104-00-11-05-02-00 |
| 330104-00-05-05-02-00 | 330104-00-05-05-02-00 | 330104-00-12-05-02-00 |
| 330103-07-16-05-02-00 | 330104-00-05-10-02-00 | 330104-00-12-10-02-00 |
| 330103-15-23-05-02-CN | 330103-10-20-05-02-CN | 330104-00-07-10-02-CN |
| 330104-00-04-10-02-CN | 330103-15-23-05-02-CN | 330104-00-08-10-02-CN |
| 330103-10-20-05-02-CN | 330104-00-04-10-02-CN | 330104-00-06-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
