Installed fit
Half-metre lead completion is a primary decision point for this configuration.
Item NO.:
330105-02-12-05-02-00Order(MOQ):
1Goods Stock:
40Payment:
T/TLead Time：
In stockWeight:
0.04KGDimension:
1.2x1.1x64cmDescription:
3300 XL 8 mm Reverse-Mount Proximity ProbePrice:
AskSend the full probe and Proximitor labels, mounting drawing, target details, required system length, quantity and destination. We support current, discontinued and difficult-to-source industrial parts.
330105-02-12-05-02-00 is suited to compact assemblies where a reverse-mounted 3/8-24 UNF probe can be reached from behind the bracket. Its half-metre lead keeps excess cable out of the immediate sensing area while leaving the ClickLoc joint close enough for planned service access.
330105-02-12-05-02-00 does not form a calibrated channel by itself. The extension cable must be chosen so the probe lead and cable together match the total length of the installed Proximitor Sensor, which makes the cabinet location part of the selection decision.
330105-02-12-05-02-00 offers a practical fit when the machine provides the correct imperial thread, target reach and protected connector space. Buyers should compare the mounting drawing and complete chain labels before treating another short reverse-mount probe as equivalent.
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Reverse-Mount Proximity Probe |
| Ordering family | 330105 |
| Mounting style | Reverse mount |
| Mounting thread | 3/8-24 UNF |
| Integral lead length | 0.5 m |
| Connector option | Miniature coaxial ClickLoc connector |
| Agency approval option | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Half-metre lead completion is a primary decision point for this configuration.
Rear-access mounting is a primary decision point for this configuration.
3/8-24 thread identity is a primary decision point for this configuration.
Match the 0.5 m probe lead with the official extension-cable length and Proximitor Sensor that form the selected five- or nine-metre system.
Provide rear access for the reverse-mount hardware and a protected route from the short integral lead to the extension-cable connection.
Compare the machine drawing, target, complete probe code, cable plan and Proximitor label. Stop before installation if the mounting geometry or total system length cannot be confirmed.
Yes, but the selected extension cable must bring the complete probe-to-Proximitor chain to an approved system length. Choose it from the installed Proximitor identity, not from physical reach alone.
Confirm 3/8-24 UNF thread compatibility, rear tool access, target reach and a protected cable exit. Stop if the probe cannot be removed without pulling on the lead or connector.
The replacement may have changed the mechanical gap, target condition, connector seating or total electrical length. Re-establish the installed geometry and matched chain before adjusting the channel.
Reuse it only when its full ordering code, condition and length complete the same supported system with the installed Proximitor Sensor. A ClickLoc connector that mates physically is not enough.
De-energize as required, separate the joint without pulling the cable, inspect and clean the connector surfaces, then reseat it fully. Replace damaged or contaminated components rather than forcing the connection.
Provide the complete model, a readable probe label, the installed Proximitor label, required system length, mounting-thread confirmation, quantity and destination. These details distinguish the short reverse-mount probe from similar 3300 XL options.
Exact-model review for new original industrial automation parts.
Complete nameplate and system details help us check the required configuration before quotation.
Our team assists with delivery coordination, incoming identity checks and post-purchase questions.
Purchase protection
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Need warranty support for 330105-02-12-05-02-00? Send the order reference, full nameplate photograph and a clear description of the issue.
Product names and trademarks remain the property of their respective owners. Apter is an independent supplier.
Document access
Open the verified English technical document prepared for this product page.
| 330103-00-04-50-11-00 | 330103-00-07-10-02-00 | 330103-05-10-02-00 |
| 330103-00-05-05-02-00 | 330103-00-07-20-02-00 | 330103-00-25-50-02-02 |
| 330103-00-05-10-01-00 | 330103-00-08-05-02-00 | 330103-01-06-05-02-00 |
| 330103-00-05-10-02-00 | 330103-00-08-10-02-00 | 330103-02-06-05-02-00 |
| 330103-00-05-10-02-05 | 330103-00-08-10-02-05 | 330103-02-07-10-02-00 |
| 330103-00-05-50-12-00 | 330103-00-09-10-02-00 | 330103-02-12-10-02-00 |
| 330103-00-06-05-02-00 | 330103-00-10-05-01-00 | 330103-03-06-05-02-00 |
| 330103-00-06-10-02-00 | 330103-00-10-10-02-00 | 330103-03-12-05-02-00 |
| 330103-00-06-10-02-CN | 330103-00-10-10-02-05 | 330103-05-10-10-02-05 |
| 330103-00-06-15-02-CN | 330103-00-10-50-02-00 | 330103-05-12-10-01-00 |
| 330103-00-06-05-02-CN | 330103-00-12-10-01-00 | 330103-05-13-10-02-00 |
| 330103-00-05-05-02-CN | 330103-00-12-10-02-05 | 330103-05-15-05-02-00 |
| 330103-00-05-10-02-CN | 330103-00-08-05-02-CN | 330103-02-12-05-02-CN |
| 330103-00-05-15-02-CN | 330103-00-10-10-02-CN | 330103-06-13-05-02-CN |
| 330103-00-05-20-02-CN | 330103-00-07-05-02-CN | 330103-00-21-10-11-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
