Selection
- Match the 120/170 mm reach and verify that the exact approval code satisfies the project requirement.
- Review the complete hazardous-area loop, not only the probe certificate.
Item NO.:
330104-12-17-10-01-05Order(MOQ):
1Goods Stock:
19Payment:
T/TLead Time：
In stockWeight:
0.08KGDimension:
21.5x23x3.5cmDescription:
Proximity SensorPrice:
AskA long-reach armored M10 × 1 probe with connector protector and multiple approvals for controlled installation environments.
Some long-reach metric installations need the sensing tip to extend well beyond the threaded mounting point. The 120 mm unthreaded section and 170 mm overall case of 330104-12-17-10-01-05 are intended for that geometry within a matched 3300 XL 8 mm measurement chain.
Along with its armored construction, 330104-12-17-10-01-05 carries a 1.0 m lead and a connector protector. That combination is useful where the probe route and ClickLoc joint need mechanical protection, but the available bend space and final insertion depth should still be checked at the machine.
Approval code 05 is part of the complete ordering identity rather than a generic promise for every site. When receiving 330104-12-17-10-01-05, compare the unit markings with the project requirement and keep the approved installation method consistent with the rest of the loop.
Compare the full model and agency markings on the supplied unit with the project requirement, then inspect the armored lead and connector protector. A family-level certificate should not substitute for the exact delivered configuration.
Compare the 120 mm unthreaded length and 170 mm case with the machine drawing and removed probe. Confirm insertion depth and adjustment range before the maintenance window begins.
No. The probe is one part of the installation; the cable path, barriers or isolators, wiring method and site classification must follow the approved system design.
Keeping the specified protector preserves the ordered configuration and helps shield the connection. If access is poor, improve the route or service clearance instead of changing the probe option in the field.
Recheck the long-body insertion position and final gap first, then compare cable routing and channel settings with the previous record. A geometry change can look like an electrical change.
Use only a configuration with the same mechanical reach, lead, connector protection and required approval status. A probe that fits the M10 × 1 thread can still be unsuitable for the certified installation.
Supplied products are covered for 12 months under ApterPLC sales terms. Keep the complete nameplate, original packaging and transaction record so the exact unit and revision can be identified during support.
Support: sales1@apterpower.com · +8618020776782
Use this document to review the armored 3300 XL 8 mm probe geometry, connector-protector and approval options, matched-system specifications and the drawings relevant to this configuration.
Download the 330104-12-17-10-01-05 filtered official datasheet|
3300/53 |
4454-156 |
1701/15 |
|
3300/21 |
16137-174 |
136294-01 |
|
990-04-XX-01-CN |
16137-177 |
330180-52-05 |
|
330354-040-24-05 |
330980-70-05 |
330104-00-06-10-02-00 |
|
330930-045-00-00 |
330180-92-05 |
330104-00-06-10-11-00 |
|
330130-070-00-CN |
177230-01-01-CN |
330104-00-07-05-02-00 |
|
3500/93 135799-02 |
330930-060-00-05 |
330103-11-19-10-02-00 |
|
3500/93 135785-02 |
3500/62 133811-03 |
330104-00-07-90-02-00 |
|
330103-05-15-05-02-00 |
3500/70M 140734-09 |
330104-00-08-05-02-00 |
|
330104-00-15-10-02-00 |
330905-08-13-10-02-05 |
330104-05-13-10-02-00 |
|
330106-05-30-50-02-00 |
330104-01-08-10-01-05 |
330104-05-15-05-02-00 |
|
330907-05-30-05-02-05 |
330101-00-20-05-02-05 |
330104-06-12-10-02-00 |
|
330106-05-30-20-02-CN |
330104-06-14-50-02-00 |
330104-10-18-10-01-00 |
|
330103-00-05-20-02-CN |
330103-00-04-10-12-00 |
330104-00-06-10-02-CN |
|
330851-02-000-030-10-00-05 |
330105-02-12-90-02-05 |
330104-00-07-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
