Mounting reach
Confirm that the 10 mm smooth section and 200 mm body fit the bracket and withdrawal path.
Item NO.:
330104-10-20-05-02-00Order(MOQ):
1Goods Stock:
10Payment:
T/TLead Time：
In stockWeight:
0.3KGDimension:
5.3x3.2x10cmDescription:
PROBEPrice:
AskAn armored M10 × 1 probe with a 10 mm unthreaded section, 200 mm case, 0.5 m lead and standard ClickLoc cable.
330104-10-20-05-02-00 is identified as an armored M10 × 1 probe with a 10 mm unthreaded section, 200 mm case, 0.5 m lead and standard ClickLoc cable.
For 330104-10-20-05-02-00, the full coded configuration and its connected system should be checked together. A matching connector or similar appearance does not establish interchangeability.
Before quoting 330104-10-20-05-02-00, provide the complete label and photos of the mounting point, cable route and connected equipment so the selected part can be verified against the installed chain.
Confirm that the 10 mm smooth section and 200 mm body fit the bracket and withdrawal path.
Include the 0.5 m probe lead when matching the extension cable to the Proximitor Sensor.
Option 02 has no connector protector; keep the ClickLoc joint clean, dry and supported.
| System family | 3300 XL 8 mm Proximity Transducer System |
|---|---|
| Probe thread | M10 × 1 |
| Probe construction | Armored |
| Nominal system sensitivity | 7.87 V/mm (200 mV/mil) |
| Linear range | 2.0 mm (80 mils) |
| Frequency response | 0 to 10 kHz, +0/-3 dB |
| Probe tip material | Polyphenylene sulfide (PPS) |
| Probe case material | AISI 303 or 304 stainless steel |
| Unthreaded length | 10 mm |
| Overall case length | 200 mm |
| Total probe length | 0.5 m |
| Connector / cable | Standard ClickLoc cable; no connector protector |
| Agency approval | Not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
No. The code also specifies a 10 mm unthreaded section, 200 mm case, 0.5 m lead, armored construction and option 02 ClickLoc cable. Every coded position must match.
Mounting depth and withdrawal space must first be verified. The 200 mm body and 10 mm smooth section affect sensing-tip position and installation clearance.
Components must belong to the matched 3300 XL 8 mm system. The 0.5 m probe lead plus extension-cable length must match the system length required by the Proximitor Sensor.
No. Option 02 specifies a standard ClickLoc cable without a connector protector. Any additional environmental protection should be stated in the inquiry.
Provide the complete probe, extension-cable and Proximitor nameplates, mounting dimensions, connector photos, quantity and delivery destination.
The supplied product is covered for 12 months under ApterPLC's sales terms. Retain the product nameplate, packaging and transaction record for warranty assessment.
|
3300/45 |
84661-30 |
84661-25 |
|
330850-90-CN |
128031-01C |
16710-30 |
|
991-01-XX-01-05 |
170180-01-05 |
135489-01 |
|
990-08-XX-01-00 |
330400-02-CN |
135489-04 |
|
330730-040-00-05 |
400100-100-02 |
135813-01 |
|
330130-080-01-CN |
330730-040-01-00 |
136188-02 |
|
330104-00-20-10-02-00 |
3500/50 133388-02 |
136483-01 |
|
330104-00-25-05-02-00 |
130944-01 128275-01F |
136711-01 |
|
330101-00-16-10-02-00 |
330103-03-12-05-02-00 |
138708-01 |
|
330101-00-19-10-02-00 |
330103-00-06-10-02-00 |
140471-01 |
|
330104-10-18-10-01-00 |
330102-00-80-10-02-00 |
140471-02 |
|
330101-02-78-05-02-00 |
330101-00-08-05-02-00 |
140482-01 |
|
330104-00-08-10-02-CN |
330102-00-13-10-02-00 |
149992-01 |
|
330105-02-12-15-12-CN |
330104-00-06-10-02-00 |
149992-02 |
|
330710-000-060-10-02-00 |
330709-000-050-10-02-00 |
135473-01 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
