Compact mounting arrangement
- Confirm that the 80 mm case provides the required adjustment and withdrawal range.
- Establish the operating gap from the machine drawing.
- Compare complete geometry before replacing a longer M10 × 1 probe.
Item NO.:
330104-01-08-10-01-05Order(MOQ):
1Goods Stock:
11Payment:
T/TLead Time：
In stockWeight:
0.1KGDimension:
2.2x12.4x12.6cmDescription:
PROBEPrice:
AskAn armored M10 × 1 probe with a 10 mm unthreaded section, compact 80 mm case, 1.0 m total length, protected ClickLoc connection and CSA/ATEX/IECEx option.
Compact brackets suit 330104-01-08-10-01-05 because its armored M10 × 1 body combines a 10 mm unthreaded section with an 80 mm overall case.
A 1.0 m channel can use 330104-01-08-10-01-05 directly with its matching 1.0 m Proximitor Sensor; option 01 adds a connector protector and option 05 provides CSA, ATEX and IECEx approvals.
Mechanical protection on 330104-01-08-10-01-05 comes from flexible stainless-steel armor, while the cable route still observes the 25.4 mm minimum bend radius.
Useful adjustment and withdrawal clearance need to accommodate the 80 mm case and 10 mm unthreaded section. A shared M10 × 1 thread alone does not show that a bracket set for a longer probe will position this compact body correctly.
The maximum M10 × 1 thread engagement is 15 mm, so 18 mm exceeds the limit and can cause binding. The bracket or internal thread depth needs correction before installation.
The armor provides mechanical protection but does not reduce the 25.4 mm minimum cable bend radius. The route also needs to avoid sharp bends and loads transferred to the case or ClickLoc connector.
Electrical and physical interchangeability is available between 3300 XL 8 mm components and non-XL 3300 5 mm or 8 mm components. When the families are mixed, completed-system performance follows the non-XL specifications.
The standard system is factory calibrated to AISI 4140 steel. Its stated accuracy and interchangeability do not carry over automatically to another target material, so the new target needs an appropriate calibration basis.
A proximity output by itself does not establish suitability for tachometer or overspeed duty. The application needs the appropriate overspeed-protection assessment before this 3300 XL 8 mm system is selected.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the product nameplate, original packaging and transaction record available if warranty support is required.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
