Long-case installation
- Verify bracket position and withdrawal path for the 250 mm case.
- Set insertion depth from the machine drawing and required gap.
- Support the unarmored lead against abrasion and pull.
Item NO.:
330103-12-25-10-02-00Order(MOQ):
1Goods Stock:
11Payment:
T/TLead Time：
In stockWeight:
1.3KGDimension:
7.6x5.1x35.6cmDescription:
PROXIMITY TRANSDUCERPrice:
AskAn unarmored M10 × 1 probe with a 120 mm unthreaded section, 250 mm case, 1.0 m total length, standard ClickLoc connection without protector and the no-approval option.
Connection protection is a site consideration for 330103-12-25-10-02-00 because option 02 supplies its miniature coaxial ClickLoc joint without a protector.
The long-body geometry of 330103-12-25-10-02-00 combines an unarmored M10 × 1 probe, a 120 mm unthreaded section and a 250 mm overall case.
Within a 1.0 m channel, 330103-12-25-10-02-00 connects directly to the corresponding 1.0 m Proximitor Sensor without an extension cable, and the ending 00 identifies the no-approval configuration.
The installation envelope includes the complete 250 mm case, no more than 15 mm of M10 × 1 thread engagement and a practical withdrawal path. Bracket support and machine-side access therefore matter as much as forward clearance.
Option 02 leaves the ClickLoc connection without a protector. A dry, correctly seated joint with suitable environmental protection helps rule out moisture or connection movement before the probe gap or monitor settings are altered.
This 1.0 m probe connects directly to the corresponding 1.0 m 3300 XL 8 mm Proximitor Sensor. An extension cable is not part of that 1.0 m system arrangement.
The published 1.0 m probe range is 7.09 to 8.09 Ω, so 8.4 Ω is outside the nominal band. The reading should not be accepted as a normal probe-circuit result; the connector, lead and test setup need attention before sensor adjustment.
The unarmored lead benefits from support that keeps vibration and pull away from the probe case and ClickLoc connector. A 25.4 mm minimum bend radius and a stable joint reduce repeated flexing.
A nearby probe does not establish the approval status of this order code. The ending 00 identifies a no-approval configuration, so a classified location needs a suitably approved model selected for that project.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the product nameplate, original packaging and transaction record available if warranty support is required.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
