Tip geometry
The 10 mm unthreaded section affects insertion and bracket clearance.
Item NO.:
330103-01-06-05-02-0Order(MOQ):
1Goods Stock:
14Payment:
T/TLead Time：
In stockWeight:
0.55KGDimension:
24.3x4.6x15.5cmDescription:
PROBEPrice:
AskA non-armored metric probe with 10 mm unthreaded length, a 60 mm case and a 0.5 m lead.
330103-01-06-05-02-00 is a non-armored metric probe in the 3300 XL 8 mm proximity transducer system. It uses an M10 × 1 thread.
The 01 field specifies 10 mm of unthreaded length, and 06 specifies a 60 mm overall case. The 05 field gives a 0.5 m lead, while option 02 is standard cable without a connector protector.
The final 00 is the published no-approval-required selection. Confirm the bracket geometry and complete electrical system length before substitution.
The 10 mm unthreaded section affects insertion and bracket clearance.
The 60 mm overall case must suit the installed mounting arrangement.
Match the 0.5 m lead and extension cable to the Proximitor Sensor.
| Manufacturer | Bently Nevada |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Probe construction | Non-armored metric probe |
| Thread | M10 × 1 |
| Unthreaded length | 10 mm |
| Overall case length | 60 mm |
| Total lead length | 0.5 m |
| Connector / cable option | Standard ClickLoc; no connector protector |
| Approval option | 00 — not required |
| Matched-system linear range | 2.0 mm (80 mils) |
| Nominal average scale factor | 7.87 V/mm (200 mV/mil) |
| Matched-system frequency response | 0 to 10 kHz, +0 / -3 dB |
| Probe tip material | Polyphenylene sulfide (PPS) |
| Probe case material | AISI 303 or 304 stainless steel |
| Probe cable | 75 Ω triaxial, FEP insulated |
| Connector material | Gold-plated brass or gold-plated beryllium copper |
| Minimum cable bend radius | 25.4 mm (1.0 in) |
| Probe case-to-lead tensile strength | 330 N (75 lbf), maximum rated |
| Connector tightening torque | 0.565 N·m (5 in·lbf), maximum |
| Standard probe temperature range | -52°C to +177°C (-62°F to +350°F) |
| Minimum flat target diameter | 15.2 mm (0.6 in) |
| Recommended minimum shaft diameter | 76.2 mm (3.0 in) |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Yes. The 01 option provides 10 mm of unthreaded length ahead of the M10 × 1 body.
The case length is the same, but the 10 mm unthreaded section changes engagement and insertion geometry, so the bracket needs review.
Use the matching extension cable so the probe lead and cable total equals the Proximitor Sensor electrical length.
Option 02 does not include a connector protector, so the connection needs suitable protection for the installed conditions.
It is a non-armored 330103 probe; an armored 330104 configuration should be reviewed for that route.
Include the 10 mm unthreaded section, 60 mm case, 0.5 m lead, bracket geometry and connected cable and sensor models.
Share the exact nameplate, mounting or route dimensions, connected component labels and approval documents. ApterPLC can then prepare a model-focused quotation without treating a similar connector or family name as proof of interchangeability.
ApterPLC provides a one-year warranty on this item, giving buyers a clear support path after delivery.
Apter sells industrial automation parts through independent channels and is not an authorized distributor, dealer or representative of the brands shown. Product names, images and trademarks are used for identification only.
This model-specific PDF brings together the relevant Baker Hughes ordering-code and technical pages for 330103-01-06-05-02-00. Use it to verify the 10 mm unthreaded section, 60 mm case, 0.5 m lead, ClickLoc option and approval selection before ordering or replacement.
Open the 330103-01-06-05-02-00 Datasheet (PDF)|
84661-17 |
149992-01 |
125680-01 |
|
135489-04 |
330850-50-05 |
125704-01 |
|
330180-91-05 |
3500/33 149986-01 |
125720-01 |
|
330180-X1-CN |
3500/32M 149986-02 |
125720-02 |
|
330180-50-CN |
330103-00-06-10-02-00 |
125736-01 |
|
102045-040-00 |
330105-02-12-15-12-05 |
125760-01 |
|
9200-02-01-10-00 |
330103-00-03-10-02-00 |
125768-01 |
|
330103-00-04-10-02-00 |
330104-00-04-10-02-05 |
125800-01 |
|
330103-00-14-05-02-00 |
330104-00-14-10-02-05 |
125800-02 |
|
330103-00-02-10-02-05 |
330106-05-30-10-02-00 |
125840-01 |
|
330101-00-12-10-02-05 |
330103-00-03-05-02-00 |
125840-02 |
|
330105-02-12-05-02-00 |
330101-00-12-10-02-05 |
126615-01 |
|
330905-00-03-10-02-00 |
330103-00-05-05-02-00 |
126632-01 |
|
330104-00-05-05-02-CN |
330103-00-05-05-02-CN |
126648-01 |
|
330704-000-050-10-01-05 |
330103-00-05-10-02-CN |
126648-02 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
