Item NO.:
3301030014100100Order(MOQ):
1Goods Stock:
36Payment:
T/TLead Time：
In stockWeight:
0.15KGDimension:
20.5x22.4x3.3cmDescription:
PROXIMITY PROBESPrice:
Ask
Installation context
330103-00-14-10-01-00 is a Bently Nevada 3300 XL 8 mm proximity probe selected where the physical mounting stack governs the replacement decision. Its 0 mm unthreaded section and 140 mm case need to be evaluated as part of the installed bracket, rather than as isolated catalogue values.
Before a planned shutdown, 330103-00-14-10-01-00 should be assessed for reach, locknut adjustment, target position and rear removal space. The M10 × 1 mounting thread is only one part of that mechanical decision; the full body geometry determines whether installation and later service remain practical.
Once the mechanical fit is accepted, 330103-00-14-10-01-00 is completed as a defined 3300 XL transducer system. Its 1.0 m integral lead is only one component of the completed measurement chain and must be paired with the correct official extension cable and matched Proximitor Sensor.
Fit path
Configuration focus
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | Metric proximity probe |
| Ordering family | 330103 |
| Thread | M10 × 1 |
| Cable armor | Not included |
| Unthreaded length | 0 mm |
| Overall case length | 140 mm |
| Integral cable length | 1.0 m |
| Cable / connector option | 01 — manufacturer ordering-code cable / connector option |
| Agency option | 00 — approval not required |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Source: Baker Hughes Bently Nevada 3300 XL 8 mm Proximity Transducer System Data Sheet, 141194 Rev. AM. Values are limited to the manufacturer’s published ordering-code definitions for this configuration.
Technical note
The primary risk for 330103-00-14-10-01-00 is mechanical fit: the 0 mm unthreaded section and 140 mm case determine the usable mounting stack, adjustment range and future removal space. Stop before installation if the drawing cannot support all three conditions; changing monitor settings cannot resolve a geometry conflict.
Buyer and engineer support
Check the 140 mm case against recess depth, target location, locknut adjustment and the space required to disconnect the cable during future service.
First check connector seating and the full electrical length, then confirm probe gap, target condition and cable stress. Correct a physical chain problem before changing configuration or calibration.
Keep the lead supported and away from pull load, crushing, sharp edges and tight bends, while leaving the connector accessible. If the route cannot provide that protection, request an official armored configuration review.
Provide clear photographs of the remaining nameplate, the installation drawing, existing Proximitor and extension labels, and the required system length. Do not order from the M10 × 1 thread alone.
Send the complete nameplate photograph, mounting drawing, target details, required total system length, existing Proximitor and extension labels, quantity, destination and any site approval requirement.
Compare the 140 mm case with bracket thickness, locknut travel, target location and rear cable clearance. Stop before installation if the drawing does not leave safe adjustment for the operating gap.
Choose the manufacturer extension-cable length that combines with the probe lead to make the total required by the matched five- or nine-metre Proximitor Sensor. Do not field-splice the probe cable.
Supply support
Search references
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
3300/01 |
330100-50-00 |
330101-30-63-10-02-00 |
|
3300/03 |
330100-50-02 |
330102-00-13-10-02-00 |
|
3300/05 |
330100-50-05 |
330102-00-40-10-02-00 |
|
3300/12 |
330101-00-08-05-02-00 |
330102-00-80-10-02-00 |
|
3300/16 |
330101-00-08-05-02-05 |
330102-22-58-10-02-00 |
|
3300/20 |
330101-00-08-10-02-00 |
330103-00-02-05-01-00 |
|
3300/30 |
330101-00-08-20-02-05 |
330103-00-03-05-02-00 |
|
3300/35 |
330101-00-12-10-02-05 |
330103-00-03-10-01-05 |
|
3300/45 |
330101-00-15-10-02-00 |
330103-00-03-10-02-00 |
|
3300/46 |
330101-00-16-10-02-00 |
330103-00-03-10-02-05 |
|
3300/47 |
330101-00-18-10-02-05 |
330103-00-03-50-02-00 |
|
3300/50 |
330101-00-19-10-02-00 |
330101-XX-XX-10-02-05 |
|
3300/53 |
330101-00-28-05-02-00 |
330101-30-63-10-02-CN |
|
3300/55 |
330101-00-30-10-02-05 |
330101-30-63-15-02-CN |
|
3300XL 8MM |
330101-00-12-10-01-CN |
330101-XX-XX-10-02-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
