Selected page
ID 3962 is the existing page selected by the user for this revision.
Item NO.:
330103-00-10-10-02-COrder(MOQ):
1Goods Stock:
12Payment:
T/TLead Time：
In stockWeight:
0.55KGDimension:
24.3x4.6x15.5cmDescription:
PROBEPrice:
AskA non-armored metric probe with a 100 mm case, a 1.0 m lead and standard ClickLoc cable.
330103-00-10-10-02-CN is a non-armored metric probe in the 3300 XL 8 mm proximity transducer system. It uses an M10 × 1 thread.
The 00 and 10 fields specify 0 mm unthreaded length and a 100 mm overall case. The second 10 field gives a 1.0 m lead, while option 02 is standard cable without a connector protector.
Two existing public records match this full model. This revision applies only to the user-selected page ID 3962; duplicate ID 26421 remains unchanged.
ID 3962 is the existing page selected by the user for this revision.
ID 26421 is not overwritten, redirected or deleted in this batch.
Confirm bracket reach, extension cable and Proximitor Sensor labels.
DUPLICATE CONFLICT — ID 3962 is the preview primary; ID 26421 is protected pending an explicit decision.
| Manufacturer | Bently Nevada |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Probe construction | Non-armored metric probe |
| Thread | M10 × 1 |
| Unthreaded length | 0 mm |
| Overall case length | 100 mm |
| Total lead length | 1.0 m |
| Connector / cable option | Standard ClickLoc; no connector protector |
| Duplicate audit | Target ID 3962; duplicate ID 26421 protected |
| Matched-system linear range | 2.0 mm (80 mils) |
| Nominal average scale factor | 7.87 V/mm (200 mV/mil) |
| Matched-system frequency response | 0 to 10 kHz, +0 / -3 dB |
| Probe tip material | Polyphenylene sulfide (PPS) |
| Probe case material | AISI 303 or 304 stainless steel |
| Probe cable | 75 Ω triaxial, FEP insulated |
| Connector material | Gold-plated brass or gold-plated beryllium copper |
| Minimum cable bend radius | 25.4 mm (1.0 in) |
| Probe case-to-lead tensile strength | 330 N (75 lbf), maximum rated |
| Connector tightening torque | 0.565 N·m (5 in·lbf), maximum |
| Standard probe temperature range | -52°C to +177°C (-62°F to +350°F) |
| Minimum flat target diameter | 15.2 mm (0.6 in) |
| Recommended minimum shaft diameter | 76.2 mm (3.0 in) |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
It uses an M10 × 1 thread, 0 mm unthreaded length and a 100 mm overall case, so those bracket dimensions are the key mechanical match.
Select the extension cable so the 1.0 m probe lead and cable total matches the Proximitor Sensor system length.
Option 02 is the standard ClickLoc cable without a protector, so environmental protection should be planned separately.
The shared electrical family does not remove the bracket-reach difference; a 60 mm case changes mounting and withdrawal geometry.
The user selected page ID 3962 for this revision; duplicate ID 26421 remains unchanged.
Include the 100 mm case, 1.0 m lead, connector option, bracket dimensions and connected extension-cable and Proximitor Sensor models.
Share the exact nameplate, mounting or route dimensions, connected component labels and approval documents. ApterPLC can then prepare a model-focused quotation without treating a similar connector or family name as proof of interchangeability.
ApterPLC provides a one-year warranty on this item, giving buyers a clear support path after delivery.
Apter sells industrial automation parts through independent channels and is not an authorized distributor, dealer or representative of the brands shown. Product names, images and trademarks are used for identification only.
This model-specific PDF brings together the relevant Baker Hughes ordering-code, technical and approval pages for 330103-00-10-10-02-CN. Use it to verify the 100 mm case, 1.0 m lead, ClickLoc option and CN country-specific approval suffix before ordering or replacement.
Open the 330103-00-10-10-02-CN Datasheet (PDF)|
84661-17 |
149992-01 |
125680-01 |
|
135489-04 |
330850-50-05 |
125704-01 |
|
330180-91-05 |
3500/33 149986-01 |
125720-01 |
|
330180-X1-CN |
3500/32M 149986-02 |
125720-02 |
|
330180-50-CN |
330103-00-06-10-02-00 |
125736-01 |
|
102045-040-00 |
330105-02-12-15-12-05 |
125760-01 |
|
9200-02-01-10-00 |
330103-00-03-10-02-00 |
125768-01 |
|
330103-00-04-10-02-00 |
330104-00-04-10-02-05 |
125800-01 |
|
330103-00-14-05-02-00 |
330104-00-14-10-02-05 |
125800-02 |
|
330103-00-02-10-02-05 |
330106-05-30-10-02-00 |
125840-01 |
|
330101-00-12-10-02-05 |
330103-00-03-05-02-00 |
125840-02 |
|
330105-02-12-05-02-00 |
330101-00-12-10-02-05 |
126615-01 |
|
330905-00-03-10-02-00 |
330103-00-05-05-02-00 |
126632-01 |
|
330104-00-05-05-02-CN |
330103-00-05-05-02-CN |
126648-01 |
|
330704-000-050-10-01-05 |
330103-00-05-10-02-CN |
126648-02 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
