Item NO.:
33010300061502CNOrder(MOQ):
1Goods Stock:
36Payment:
T/TLead Time：
In stockWeight:
0.08KGDimension:
2x1.5x171cmDescription:
EXTENSION CABLEPrice:
Ask
Service decision
330103-00-06-15-02-CN is a Bently Nevada 3300 XL 8 mm metric proximity probe for maintenance teams that need to confirm an installed measurement chain before a routine replacement. Its 60 mm case and 1.5 m lead provide a clear starting point for matching the existing mounting and cable route.
The practical decision for 330103-00-06-15-02-CN is not made from the M10 × 1 thread alone. The mounting stack, target position, connector access and total system length must continue to suit the current machine arrangement after the replacement is fitted.
330103-00-06-15-02-CN supports a defined transducer-system selection rather than an improvised cable change. Its 1.5 m integral lead is only one component of the completed measurement chain and must be paired with the correct official extension cable and matched Proximitor Sensor.
Maintenance priorities
Configuration focus
Verified configuration
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Product family | 3300 XL 8 mm proximity transducer system |
| Product type | 3300 XL 8 mm Metric Proximity Probe |
| Ordering family | 330103 |
| Thread | M10 × 1 |
| Cable armor | Not included |
| Unthreaded length | 0 mm |
| Overall case length | 60 mm |
| Integral cable length | 1.5 m |
| Connector / cable | 02 — miniature coaxial ClickLoc / standard cable |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Source: Baker Hughes Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet, 141194 Rev. AM. Dimensions and options reflect the manufacturer’s published ordering-code definitions.
Technical note
The 1.5 m probe lead of 330103-00-06-15-02-CN does not define a complete calibrated measurement chain. Select the official extension and matched five- or nine-metre Proximitor Sensor as one system, and stop before installation if the total length cannot be retained.
Buyer and engineer support
Not until the bracket is confirmed as M10 × 1. Use the documented metric mounting arrangement; forcing a visually similar thread can damage the hardware and prevent a correct gap setting.
Check the M10 × 1 thread, 60 mm body position, locknut travel, target reach and rear cable clearance. This determines whether the probe can be adjusted safely in the existing stack.
Select the official extension length that combines with the 1.5 m probe lead to form the total required by the matching five- or nine-metre Proximitor Sensor. Do not use a field splice.
Check ClickLoc seating, total system length, probe gap, target condition and cable stress first. Restore the physical measurement chain before changing monitor configuration.
Use the delivered nameplate, project classification and applicable manufacturer installation requirements. The family name and terminal model suffix are not a substitute for that comparison.
Send the complete label photo, M10 × 1 mounting drawing, required total system length, Proximitor label, site requirement, quantity and destination.
Supply support
Search references
Apter's 1 Year Warranty
Apter provides a 1-year warranty on every item we sell.
Our free 1-year warranty makes every Apter purchase a dependable, reliable investment in your company's future.
Apter sells industrial automation parts including new and discontinued products, and purchases such featured products through independent channels. Apter is not an authorized distributor, dealer or representative of the products featured on this site. All product names/product images, trademarks, brands and logos used on this website are the property of their respective owners. Product descriptions, depictions or sales with these names, images, trademarks, brands and logos are for identification purposes only and do not imply any affiliation or authorization to any rights holder.
|
330980-50-00 |
330878-50-00 |
330780-50-00 |
|
330980-50-05 |
330930-040-00-00 |
330780-90-00 |
|
330980-51-05 |
330877-040-37-00 |
330780-91-00 |
|
330980-71-CN |
330877-080-36-00 |
330850-50-00 |
|
330930-040-01-00 |
330910-05-10-02-00 |
330850-50-05 |
|
330930-045-00-05 |
330909-00-60-10-02-05 |
330850-90-05 |
|
330930-045-01-00 |
330910-00-05-50-02-00 |
330730-040-00-00 |
|
330930-060-00-00 |
330910-03-09-05-02-05 |
330730-040-00-00 |
|
330930-065-00-05 |
330904-05-14-05-02-00 |
330730-040-00-05 |
|
330930-065-01-05 |
330905-00-07-10-02-00 |
330730-040-03-00 |
|
330930-065-01-05 |
330905-00-08-10-02-00 |
330730-080-00-00 |
|
330930-065-03-05 |
330905-00-10-10-02-00 |
330730-080-01-00 |
|
330930-060-01-CN |
330905-06-14-10-02-00 |
330730-080-12-00 |
|
33104-00-10-10-02-05 |
330910-05-11-10-02-00 |
330730-080-12-CN |
|
3500/05-01-01-00-00-00 |
330907-05-30-05-02-CN |
330709-050-120-10-02-00 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
