Selection
- Match the 3/8-24 thread, 0.3 inch unthreaded section, 2.8 inch case and armored cable requirement.
- Confirm the extension cable and Proximitor Sensor for the complete system length.
Item NO.:
330102-03-28-10-02-00Order(MOQ):
1Goods Stock:
26Payment:
T/TLead Time：
In stockWeight:
0.07KGDimension:
21.5x23x3.5cmDescription:
3300 XL 8 mm Armored Proximity ProbePrice:
Ask3/8-24 standard-mount 3300 XL 8 mm armored probe with 0.3 in unthreaded length, 2.8 in case, 1.0 m lead and no approval option.
330102-03-28-10-02-00 is a Bently Nevada 3300 XL 8 mm standard-mount proximity probe with 3/8-24 threads and stainless-steel cable armor.
The ordering code specifies a 0.3 inch unthreaded section, 2.8 inch overall case length, 1.0 m total probe length and standard ClickLoc connection without a protector. Code 00 indicates that an agency approval option is not required.
The armored cable provides mechanical protection, but the installation must still respect bend radius, connector strain, mounting depth and the complete calibrated system length.
The matched 3300 XL 8 mm chain measures static position and dynamic vibration on fluid-film bearing machines and can provide Keyphasor reference and speed measurements. The probe is one part of that chain.
The armor adds mechanical protection around the 75 ohm triaxial lead, but the route still needs the 25.4 mm minimum bend radius and strain control at the ClickLoc joint. Armor does not make a sharp bend acceptable.
The bracket must match a 3/8-24 thread, 0.3 in unthreaded section, 2.8 in case and no more than 0.563 in thread engagement. These values determine insertion depth and target reach.
Its standard miniature ClickLoc lead connects into the 3300 XL measurement chain. The DC supply is specified at the Proximitor Sensor as -17.5 to -26 Vdc, or -23 to -26 Vdc when barriers are used.
No. Code 10 specifies a 1.0 m probe lead, and the manufacturer states that one-metre systems do not use an extension cable. The associated Proximitor Sensor must be the documented 1 m option.
The official ordering data does not establish that replacement relationship. This model uses 3/8-24 threads, imperial case geometry and an armored lead, so the machine mount and complete transducer configuration must be matched to those exact fields.
For a matched standard 1 m system on an AISI 4140 steel target, the published center setting is approximately -9 Vdc at 1.27 mm. Keep the final reading within the 2 mm linear range.
The 1.0 m probe has a nominal center-to-outer resistance of 7.59 plus or minus 0.50 ohm. Compare that value, then review ClickLoc seating, armored-cable termination and the target gap before changing monitor configuration.
The supplied product is covered for 12 months under ApterPLC sales terms. Retain the complete product label, original packaging and transaction record so the exact unit can be identified quickly if warranty support is needed.
Includes an ApterPLC guide page and selected manufacturer pages covering 3300 XL 8 mm system specifications, the 330102 armored-probe ordering table and probe drawings.
| Product Models | ||
|---|---|---|
| FS-CPCHAS-0001 | FS-PDC-IOX05-1 | AS-B809-016 |
| FC-PSU-240516 | FS-PDC-IOS05 | AS-B808-016 |
| FC-QPP-0002 | FS-PDC-IOR05 | AS-P810-000 |
| FC-BKM-0001 | FC-PDB-IO05 | AS-B875-111 |
| FE-USI-0002 | FS-PDB-CPX05 | POLYSONICS MST-P |
| FC-DCOM-232/485 | FC-PDB-0824 | HS2000 DCS 2F70 |
| FC-IOCHAS-0001R | FS-BLIND-CHAS 4HE | HS2000 DCS 2F80 CPU HS2F80 |
| FC-IOCHAS-0001S | FS-BLIND-CHAS 1HE | HS2000 DCS 2F40A |
| FS-SAI-1620m | FS-BLIND-CHAS 3HE | MDDDT5540 |
| FS-SDI-1624 | FC-TSDI-1624 | TSX08RCOMN |
| FS-SDO-0824 | FC-TSDI-16UNI | TSX08EAV8A2 |
| FS-SDIL-1608 | FC-TSRO-0824 | ES2403 |
| FS-TERM-0001 | FC-TSDO-0824 | 6ES7307-1EA00-0AA0 |
| FS-TERM-0002 | FC-TSGAS-1624 | 6ES7 315-2AF03-0AB0 |
| MTL24571 | FC-TSDO-04UNI | 6FC4600-1AS01 |
| FC-PSU-UNI2450 | FS-IOBUS-CPX-1 | 6FC4600-0AR04 |
| FS-SICC-0001/ L15 | FS-IOBUS-CPIO2 | 6FX1142-1BA01 |
| IO-0001 | FS-IOBUS-CPIO8 | 620-0036 |
| FS-PDC-IOX05 | FS-IOBUS-CPIOX6 | 620-0080 /VR3.1/HR-01 |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
